802916

Concept VP5153 Manual

25
Zoom out
Zoom in
Previous page
1/59
Next page
48 49
ENEN
VP5150 | VP5151 | VP5152 | VP5153 VP5150 | VP5151 | VP5152 | VP5153
CLEANING AND MAINTENANCE
Accessories and vacuum cleaner can be cleaned with a damp cloth.
Do not immerse the power cord, plug or appliance in water or any other liquid.
Do not use aggressive substances such as solvents or abrasives for cleaning!
TROUBLESHOOTING
Problem Cause Remedy
The motor is not working
The plug inserted incorrectly or
insufficiently in the wall outlet. Check connection of the plug.
The wall outlet is not energized. Check the presence of voltage, e.g.
with another appliance.
The motor stopped working Poor or too low airflow, thermal
motor protection has tripped.
Unplug the power cord. Check
and clear the intake and exhaust
air passage, filter cleanliness, and if
necessary, replace the dust bag. Allow
the vacuum cleaner to cool down.
Reduction of suction power
Full or clogged dust container. Empty and clean the dust container.
The filters are clogged. Clean or replace the filters.
Clogged nozzle, tubes or hose. Check and clear the intake and
exhaust air passage.
The vacuum cleaner is warming up Warming up of the vacuum cleaner during operation is normal, it is not
amalfunction.
CHECKING THE FULLNESS OF DUST CONTAINER
If the suction power of the vacuum cleaner decreases even when the floor nozzle is raised above the floor, empty the
dust container immediately.
Warning: if the suction power is low even after the dust container is emptied, there may be several reasons:
- Some of the air passages (hose, telescopic tube, suction opening, floor nozzle or other attachments) are blocked.
- The air inlet filter in the dust container is dirty or old. It must be cleaned or replaced with a new one.
- The air outlet filter is dirty or old. It must be cleaned or replaced with a new one.
Check each of these options and fix the problem before using the appliance again. If you are unable to identify the cause
of the problem, take the appliance to your nearest service centre. Never use the appliance if the suction power is low, as
this could irreparably damage the motor.
MAINTENANCE
It is recommended to empty the dust container and clean the vacuum cleaner filters after each use of the vacuum
cleaner.
EMPTYING THE DUST CONTAINER
1. Unplug the vacuum cleaner, pull the hose out of the suction opening.
2. Press the latch on the vacuum cleaner body (Fig. 2) and remove the dust container
upwards.
3. Press the empty button (Fig. 3) and empty the dust into the waste bin.
4. After closing the container, place it back into the vacuum cleaner. Make sure the
container is positioned properly. You must hear the click of the handle latches.
REPLACEMENT AND CLEANING OF FILTERS
• The filters should be cleaned or replaced with visible soiling or when the suction
power of the vacuum cleaner drops. Check them after each use of the vacuum
cleaner.
• To avoid damaging the vacuum cleaner, do not use it without properly fitted filters.
• Unplug the vacuum cleaner before replacing the filters.
• You can purchase suitable filter types from your dealer or order from the
manufacturer.
1. Remove the dust container from the vacuum cleaner.
2. Turn the dust container cover counterclockwise and remove it.
3. Turn the filter with SMS fabric counterclockwise and remove it.
4. Remove the foam filter.
5. The filters can be cleaned by tapping. If heavily soiled, they can be washed in
lukewarm water and left to dry properly.
CHECKING AND REPLACEMENT OF THE AIR OUTLET FILTER
1. Turn the left wheel cover counterclockwise and remove it (Fig. 4).
2. Remove the filter.
3. The filter can be cleaned by tapping. If heavily soiled, it can be washed in lukewarm
water and left to dry properly.
4. Insert a clean or new air outlet filter and close the air outlet grille.
Fig. 3
Fig. 4
Fig. 2
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP5153 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP5153 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info