802916
24
Zoom out
Zoom in
Previous page
1/59
Next page
46 47
ENEN
VP5150 | VP5151 | VP5152 | VP5153 VP5150 | VP5151 | VP5152 | VP5153
OPERATING INSTRUCTIONS
ASSEMBLING THE VACUUM CLEANER
NOTICE
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Connecting flexible hose to vacuum cleaner
Insert the flexible hose into the air intake opening of the vacuum cleaner.
Push until you hear a click - fitting into the correct position (Fig. 1). To
remove the flexible hose, press the lock button and remove the hose.
The suction force can be manually adjusted on the hose handle. Slider
closed - more suction force.
Slider open - less suction force.
2. Attaching the telescopic tube to the hose extension
Slide the telescopic tube onto the hose extension and turn slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube out.
4. Attaching the floor nozzle to the telescopic tube
Insert the telescopic tube into the floor nozzle and turn slightly. The flap on the nozzle is used to switch the floor
nozzle to brushing (for smooth floors) or smooth vacuuming (for carpets).
ACCESSORIES
The following accessories are included in the package for each type of appliance:
VP5150: A, B, C, D, E, F, G, H, I (see product description)
VP5151: A, B, C, D, E, F, G, I (see product description)
VP5152: A, B, C, D, E, F, G, H (see product description)
VP5153: A, B, C, D, E, F, G (see product description)
USING THE VACUUM CLEANER
Before using the vacuum cleaner, make sure that the filters and dust container are correctly positioned and fixed.
Unwind the appropriate cord length. The yellow mark on the power cord indicates the ideal length. Do not unwind the
power cord past the red mark!
1. Insert the plug into the wall outlet.
2. Press the power switch to turn on the vacuum cleaner.
3. After vacuuming, turn off the appliance and unplug it from the wall outlet.
4. To wind the power cord, press the cord winding button. Hold the power cord with the other hand to prevent it from
twisting around.
Fig. 1
PRODUCT DESCRIPTION
1 Dust cup
2 Dust cup release button
3 Power button
4 Cord winding button
5 Power regulator
6 Carrying handle
A Nozzle brush
B Accessory holder
C Slot nozzle
D Telescopic tube
E Hose handle
F Flexible hose
G Floor nozzle
H Parquet nozzle
I Small turbo brush
1
2I
F
E
D
H
G
AB. C
6
3
4
5
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP5153 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP5153 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info