802941

Concept VP4380 Manual

25
Zoom out
Zoom in
Previous page
1/61
Next page
48 49
VP4360 / VP4370 / VP4380 VP4360 / VP4370 / VP4380
ENEN
TROUBLESHOOTING
Problem Cause Remedy
The motor is not working. The battery is discharged. Charge the battery.
Reduction of suction power. Filled or clogged dust container. Empty and clean the dust container.
The lter is clogged Clean or replace the lter.
Operating time at full charge is
less than 1 minute.
The battery life is over. Replace the battery with a new
one. Contact an authorized service
centre.
The vacuum cleaner is warming
up.
Warming up of the vacuum cleaner during operation is normal, it is not
amalfunction.
ACCESSORIES
The following accessories can be purchased for the appliance:
Filter order code 42392245 price according to the valid price list
BATTERY DISPOSAL
The appliance contains a Li-Ion battery. This type of battery contains substances that can damage the environment in
their disintegration. Before disposing of the appliance or replacing the battery, the original battery must be removed
and returned to a suitable collection point.
To remove the battery, open the cover on the bottom of the vacuum cleaner.
CHECKING THE FULLNESS OF DUST CONTAINER
If the suction power of the vacuum cleaner is reduced or the dust container is full, empty it and clean the vacuum cleaner
lter.
MAINTENANCE
It is recommended to empty the dust container and clean the vacuum cleaner lters after each use of the vacuum
cleaner.
EMPTYING THE DUST CONTAINER
1. Disconnect the charger from the mains.
2. Hold the vacuum cleaner down with a dust container.
3. Press the latch to release the dust container.
4. Remove the lter holder and empty the vacuum cleaner dust container.
5. Reverse the procedure to attach the lter holder and the lter and put the dust container back.
CLEANING AND REPLACING THE PERMANENT FILTER
The vacuum cleaner lter can be cleaned by mechanical tapping and cleaning with a soft brush. A much soiled lter
can be washed after this step and cleaned with a soft brush in lukewarm water without detergents.
It is important to let the wet parts dry thoroughly. A wet lter would be depleted by vacuuming!
Do not use a hair dryer for drying!
Note: Wet cleaning can cause more wear on the lter and thereby shortening its life.
• The lter should be cleaned or replaced with visible soiling or when the suction power of the vacuum cleaner drops.
Check it after each use of the vacuum cleaner.
• To avoid damaging the vacuum cleaner, do not use it without a properly tted lter and lter holder.
• You can purchase a suitable lter type from your dealer or order from the manufacturer.
CLEANING AND MAINTENANCE
Accessories and vacuum cleaner can be cleaned with a damp cloth.
Do not immerse the power cord or the charger in water or any other liquid.
Do not use aggressive substances such as solvents or abrasives for cleaning!
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP4380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP4380 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info