802941
24
Zoom out
Zoom in
Previous page
1/61
Next page
46 47
VP4360 / VP4370 / VP4380 VP4360 / VP4370 / VP4380
ENEN
OPERATING INSTRUCTIONS
ASSEMBLING THE VACUUM CLEANER
Warning
Always switch o the appliance and disconnect the charger from wall socket before assembling or removing accessories!
ACCESSORIES
The following accessories are included in the package for each type of appliance:
- VP4360: 1, 4, 5, 7, 8, 10 (see product description)
- VP4370: 1, 5, 6, 7, 8, 10 (see product description)
- VP4380: 1, 2, 3, 4, 6, 7, 8, 10 (see product description)
Note: For VP4360 and VP4370 vacuum cleaners, only one part of the accessory stand is included, which is sucient for
the accessories included in the product package.
CHARGING THE BATTERY
- Make sure the vacuum cleaner is turned o before charging. The charger (10) can be connected directly to the
vacuum cleaner or paired with the charging base (7). Connect the vacuum cleaner to the charger connector (9).
- When charging, the charging indicator (12) ashes red. When fully charged, the indicator light is green. When
charging is complete, the appliance automatically switches to recharging. However, do not leave the vacuum
cleaner permanently connected to the charger to avoid possible damage to the battery or its capacity.
- If the charging indicator (12) starts ashing green during vacuuming, the vacuum cleaner is discharged and will
turn o within about 1 minute.
- If the vacuum cleaner is completely discharged, the charging indicator (12) starts ashing alternately green and red
when the appliance is switched on. The vacuum cleaner must be charged.
! IF YOU WANT TO KEEP THE BATTERY LIFE AS LONG AS POSSIBLE, CHARGE IT AFTER IT IS FULLY DISCHARGED. !
INSTALLING THE CHARGING BASE
The charging base can be used as freestanding (in this case, place the base on a at and stable surface) or attached to
the wall (attach the charging base to the wall with dowels and screws).
Note: In both cases, the accessory stand (8) can be attached to the charging base (7).
USING THE VACUUM CLEANER
Note: VP4360 and VP4370 vacuum cleaners can be used for both dry and wet vacuuming. Make sure that both the lter
holder and the HEPA lter are tted correctly before use.
1. Remove the vacuum cleaner from the charging base.
2. Slide the switch (11) to position 1 to switch the vacuum cleaner on at a lower power level (the charging indicator
(12) light is yellow).
3. Slide the switch (11) to position 2 to switch the vacuum cleaner on at a higher power level (the charging indicator
(12) light is green).
4. For wet vacuuming (VP4360 and VP4370 only), use a wet vacuum nozzle that has a wiper function and the vacuum
cleaner sucks liquid when moving backwards. Move the vacuum cleaner very carefully to prevent liquid from
entering the vacuum cleaner motor. Do not shake or turn over the vacuum cleaner. The lter holder and the HEPA
lter only prevent the liquid from being sucked into the vacuum cleaner motor, but do not act as a protection
against liquid ingress into the vacuum cleaner motor. The maximum amount of liquid sucked is approximately
150ml. At larger amounts, the liquid will ow through the nozzle back out of the dust container.
Note: For wet vacuuming, vacuum only at a lower power level (switch in position 1) and do not overll the dust
container more than the marked “MAX” line.
VP4380 vacuum cleaner is not designed for vacuuming liquids!
PRODUCT DESCRIPTION
1. Long slot nozzle
2. Long slot nozzle attachment
3. Slot nozzle
4. Long slot nozzle attachment - brush
5. Nozzle for wet vacuuming
6. Turbo nozzle
7. Charging base
8. Accessory stand
9. Charger connector
123
5 4
6
7
8
9
10
15
11
12
13
14
17
16
18
10. Charger
11. On/O switch
12. Charging indicator
13. Dust container release button
14. Appliance body
15. LED lighting
16. HEPA lter
17. Filter holder
18. Dust container
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP4380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP4380 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info