802899

Concept VP4140 Manual

30
Zoom out
Zoom in
Previous page
1/71
Next page
58 59
ENEN
VP4140 | VP4150 | VP4151 | VP4160 VP4140 | VP4150 | VP4151 | VP4160
LED INDICATOR
State LED indicator colour
On Blue
Low battery Blue flashing
Empty battery Red flashing
Charging Red
Charging completed Blue
Bad battery (charging) Red and blue flash alternately
Battery care
To prolong the life of the vacuum cleaner battery, follow these instructions:
Do not leave the vacuum cleaner fully charged or completely discharged for a long time.
Prolonged discharged of the battery will result in loss of its capacity.
Do not let the vacuum cleaner to be completely discharged.
It is ideal to keep the capacity of the battery between 20 % - 80 %.
USE
Operation of the rod vacuum cleaner
1. Press the on/off button to turn on the rod vacuum cleaner.
2. During operation, press the ECO speed button and select between high speed and ECO speed. At high speed, the
suction power of the appliance will be at its maximum, while the ECO speed mode will provide less noise and longer
operating times.
3. During operation, the LED indicator on the rotating brush nozzle lights up.
4. If the appliance is standing in the upright position, always turn the rod vacuum cleaner off as the bristles could
damage the floor or the carpet.
5. If you are not using the appliance, it is recommended to store it in an upright position leaning up against the wall.
Do not let children play with the appliance.
Operation of the hand-held vacuum cleaner
1. Press the button on the hand-held vacuum cleaner and release the vacuum from the rod vacuum cleaner. Press the
on/off button to turn on the hand-held vacuum cleaner. The hand-held vacuum cleaner starts to vacuum.
2. Vacuum the surface in any direction until the surface is clean.
3. Press the on/off button to turn off the hand-held vacuum cleaner. Before turn off, turn the front of the hand-held
vacuum cleaner upwards to prevent the dust from falling out of the dust cup.
4. Before vacuuming, empty and clean the dust cup.
5. Insert the hand-held vacuum cleaner back into the rod vacuum cleaner.
CLEANING AND MAINTENANCE
Emptying the dust cup
Empty the dust cup after each use or when the dust level exceeds the maximum level. Always switch off the appliance
before cleaning it.
• Press the release button on the top of the vacuum cleaner, release the dust cup, empty it and remove the filter
holder from it.
• Press both sides of the external filter and remove the filters from the dust cup. Dump the dirt.
• Wash the filters. Allow them to dry before reassembly.
NOTE: Do not clean the vacuum cleaner with thinner or chemical solutions, as this will damage the appliance
• Insert the internal and external filters back into the dust cup Make sure you dry the inside of the dust cup.
• Place the dust cup back into the hand-held vacuum cleaner.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP4140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP4140 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info