802899
29
Zoom out
Zoom in
Previous page
1/71
Next page
56 57
ENEN
VP4140 | VP4150 | VP4151 | VP4160 VP4140 | VP4150 | VP4151 | VP4160
Off
Press
Holes for wall
mounting
23
22
21
20 19
18
15
16
17
Removable turbo nozzle
Turbo nozzle release
button
LED light
CHARGING THE APPLIANCE
1. Insert the hand-held vacuum cleaner into the rod vacuum cleaner. Ensure that the rod vacuum cleaner is off.
2. Place the rod vacuum cleaner into the charging base. Ensure that the charging base is placed on a level and
stable surface. Make sure there is no dust between the hand-held vacuum cleaner and the rod vacuum cleaner. If
necessary, clean the contacts.
3. Plug the power cord into the socket. The charging indicator lights up red, indicating that the vacuum cleaner is
charging. When charging, it is normal for the vacuum cleaner or the charging base to heat up.
Note: Even if the rod vacuum cleaner is on, if it is placed in the charging base, it automatically shuts off. While the rod
vacuum cleaner is charging, the vacuum cleaner has a current protection element. Even if you press the power button,
the appliance will remain switched o.
LED indicator
Adaptor slot
Hand-held vacuum cleaner
15. Power button
16. Battery/charge indicator
17. Dust cup release button
18. LED indicator
19. Sealing ring
20. HEPA filter
21. External filter
22. Dust cup
23. Slot nozzle
ASSEMBLING THE APPLIANCE
Folding handle
To fold the handle, press the fold the handle button. When lifting the
handle vertically, it will automatically lock into the correct position.
Assembling the charging base
The charging base must be placed on a flat surface, using screws
and wall plugs it can be attached to the wall. The assemble the
base, slide the upper part into the base.
Place the screws and wall plugs on the underside of the charging
base. Drill holes into the wall and insert the wall plugs into the
holes. Then, fasten the charging base with the screws.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP4140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP4140 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info