be performed separately for each day of the week, selecting the
days one by one. (If there are days for which you intend tocreate
the same program, it is sufficient to create the program only
once, because it can easily be applied to any other day with the
help of the “COPY” button as described in Section 4.2).
•Pressthe“PROG” button again. At that point the next programming
step should be done, i.e. the starting time of switch P1 should be
set, which is indicated on the display of the device by flashing the
time value to be set.
•Set the starting time of switch P1 by pressing, or pressing
repeatedly, the large........or........button on the front panel of the
device. (The time can be set at 10-minute intervals).
•Pressthe“PROG” button again. At this point the next programming
step should be performed, i.e. the temperature of switch P1
should be set, which is indicated on the display of the device by
flashing the temperature value to be set.
17