756996
148
Zoom out
Zoom in
Previous page
1/176
Next page
ComNav Admiral P3 Installation & Operation Appendices
Document PN 29010075 V3.1 - 146 -
The following messages are classified are “severe” errors. Typically, these messages
describe a condition that prevents normal operation in the current mode (STANDBY,
POWER STEER, AUTO, or NAV) but operation in other modes may still be possible. The
error messages may be temporarily suppressed by pressing the Fn button. They are
automatically cancelled should the condition that caused them be removed.
Message Description
COMPASS ERROR The Admiral P3 cannot read the Analog compass specified in the
Standby menu under Compass Source. Check compass wiring.
FAULTY AUX #1
FAULTY AUX #2
The Admiral P3 SPU has detected a problem in communicating
with the Control Head connected to J12 AUX1 (or J13 AUX 2).
Check all wiring.
HIGH TEMPERATURE
The SPU circuitry has heated up due to excessive current
demands. Check all wiring and verify that all output loads
(solenoids, pump motors, etc) are within the specifications given
for the SPU. Also ensure that the SPU has adequate ventilation.
INVALID CRS DATA Valid NMEA 0183 Course data has not been received at NAV1 or
NAV2 for ~28 seconds.
INVALID SPEED DATA Valid NMEA 0183 Speed data has not been received at NAV1 or
NAV2 for ~28 seconds.
Check that the Navigation System sending the data is turned on
and functioning properly. Check the wiring between the system
and the SPU.
If an Analog Compass is selected as the Compass Source in the
Standby menu, this message indicates that the signals from the
compass are faulty.
Check the wiring between the Compass and the SPU.
INVALID HEADING If an NMEA 0183 Compass or other source of Heading data
(NAV1 or NAV2 in the Standby menu) is selected as the
Compass Source, this message indicates that no valid Heading
sentences have been received for ~28 seconds.
Check that the device is turned on and functioning properly.
Check the wiring between the device and the SPU.
NO NAV DATA The SPU has not been able to detect, for ~32 seconds, at the Nav
Source specified in the Nav menu, the NMEA 0183 navigation
information it needs to operate in NAV mode.
NO SPEED DATA The SPU has not been able to detect, for ~32 seconds, at the
Speed Source specified in the Auto menu, the NMEA 0183 Speed
data it needs to operate in AUTO or WORK mode .
Check that the device sending the data is turned on and
functioning properly. Check the wiring between the device and
the SPU.
WATCH ALARM The watch alarm timer has timed out. Press the Fn button to
reset the timer.
Table 10 – Error Messages
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ComNav Admiral P3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ComNav Admiral P3 in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info