636221
26
Zoom out
Zoom in
Previous page
1/42
Next page
26
f To send the call from an external unit, touch the button corresponding to the user you want to contact.
If the system is not busy: on the external unit the caller illumination LED will light up, the
LED will flash and the
confirmation tone will sound. The video image from the external unit will appear automatically on the main internal
monitor/s. The video image can be displayed on secondary monitors (without answering the call) by pressing button 2
(programmed by default for the self-ignition function).
» If the user responds to the call: the LED
will illuminate on the external unit.
» If the user presses the lock-release control: the LED
will illuminate on the external unit.
If the system is busy: the led
will flash and the external unit will emit the system busy tone.
When a call is made from the external unit, the monitor switched on will be the main door entry monitor.
Any other secondary monitors in the same family unit will remain o.
When responding to a call from the external unit using a secondary door entry monitor, the image is automatically displayed on
the monitor (and the main door entry monitor is switched o).
To display the image without activating audio communication with the external unit, press button 2 -self-ignition/video request.
Self-ignition is possible only when the system is in standby
f Press the self-ignition button (button 2 by default) to display on the monitor the image transmitted from the external unit.
GENERAL INTERNAL CALL
SELECTIVE INTERCOM
MAIN/SECONDARY MONITORS
General intercom: function allowing calls to one or more internal units identified by the same call address as used by the
external unit.
f Press the programmed button to send the call
If the system is not busy: the receiver of the call can lift the handset (or press the audio button) to enter into
communication with the caller. The communication is terminated by replacing the handset (or by pressing the audio button
again).
If the system is busy: the LED indicator light will flash for a few seconds (on Mini monitors the privacy LED will flash 4
times).
A call from the external unit always takes priority over an intercom communication. In this case, users who are already
speaking will hear a tone similar to the ringtone, if the call is addressed to them, or otherwise a triple signalling tone will sound
and the video image from the external unit from which the call was made will appear (in the case of a main monitor).
f To terminate the call in progress and enter into communication with the external unit, hang up and then lift the handset
again (or press the audio button 2 times).
Consult page 11 onwards for programming information.
External unit (Porter) with switching (secondary): default function to be used also in systems with switching device Art.
1404 (for installations with 3 or more entrances) (see diagrams MNK/017QC, MNK/017CQC).
Secondary external unit (Porter): function to be used in systems with switching device Art. 1405 and 2 external units (see
diagram MNK/017AQC).
Main external unit (Porter): function to be used in systems with switching device Art. 1405 and 2 external units (see
diagram MNK/017AQC).
Selective intercom: function allowing calls to one or more internal units identified by a dedicated call address (see table B,
page 19), which is dierent to the call address used for external unit calls.
The KIT can manage up to a maximum of 4 door entry monitors or door-entry phones for each call button, including a
maximum of 1 main door entry monitor.
Operation
To make a call from an external unit
Self-ignition
Operation with additional internal units
Operation with additional external units
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comelit 8461MB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comelit 8461MB in the language / languages: English as an attachment in your email.

The manual is 9,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info