669025

Cola Termo Bea Manual

11
Zoom out
Zoom in
Previous page
1/13
Next page
11
Termo Bea
3.7 Idle period
If the stove is not used for long periods it is advisable to store it in a safe and protected place.
To best preserve the stove:
- carefully clean it, and replace any damaged parts if necessary;
- cover it to protect it from dust.
4 – ROUTINE STOVE CLEANING AND MAINTENANCE
Good maintenance will help improve stove operation, efficiency and service life.
Every day, before lighting the fire, remove any unburnt residuals on the grate and the ashes in the ash pan
zone.
4.1 Removing the ash
The BEA heating stove has an ash pan and removable grate which should be cleared of ash, using the poker
supplied, every time before loading fuel.
Make sure to periodically empty the ash pan, since the accumulation of ash under the grate hinders the flow of
combustion air. The grate can overheat and become damaged.
To prevent the risk of fire, allow the ashes to cool outdoors inside a metal container or in the stove and
eliminate them in compliance with current local regulations.
4.2 Cleaning the glass
The glass can be cleaned using a damp cloth and specific non-abrasive detergents.
Do not clean the glass when the stove is operating. The glass must only be cleaned when the stove is
cold.
4.3 Cleaning the flue
A reduction in heat output is nearly always due to obstruction of the flue. Also, the presence of burnt gases with
odours can be a sign of an obstructed flue. The flue
of your stove must be cleaned at regular intervals. The amount of soot and the frequency of cleaning will
depend largely on the type of fuel and the type of use (low or high heat output).
To avoid unnecessary dust, carry out cleaning according to the following instructions:
- clean only when the stove is off;
- close all openings which are not to be cleaned;
- remove the flue pipe and clean outdoors;
- remove the deposits inside the stove with a wire brush;
- all the residuals removed from the grate or the ash pan must be taken away;
- in any case, detach the pipe from the flue.
Carefully close the openings for cleaning and also check the seal of the closing cover. It must be replaced if
damaged when removing the cover during cleaning.
When refitting the pipes take care not to damage enamelled or painted parts and the seals .
Dispose of cleaning waste in accordance with the current local regulations.
4.4 Cladding maintenance
Clean the cladding only when the stove is cold.
The ceramics are handicraft production and therefore may have minor surface imperfections such as tiny spots
or slight colour differences.
It is advisable to use a soft dry cloth to clean the ceramic surfaces; the use of detergents could highlight any
imperfections.
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cola Termo Bea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cola Termo Bea in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info