669025
3
Zoom out
Zoom in
Previous page
1/13
Next page
3
Termo Bea
1 - GENERAL INFORMATION
1.1 Introduction
Dear Customer,
First of all we wish to thank you for the trust placed in us by purchasing one of our products. Please read and
carefully follow the advice given in this installation, use and maintenance manual in order make best use of the
product.
Make sure:
- installation, testing and cleaning are carried out according to that described in this manual, under
penalty of nullity of the warranty.
- to have the flue inspected by a specialised technician;
For operation faults, doubts or problems please contact your nearest service centre.
1.2 Safety rules
-
Read and follow the instructions given in the installation, use and maintenance manual
- The heating stove must never be used without being connected to the heating system
and without water in the heating chamber.
- Connect the stove to an approved flue not shared by other appliances.
- Make sure the stove is cold before carrying out any cleaning or maintenance.
- Do not use flammable liquids or substances such as alcohol or hydrocarbons to light the stove.
- The stove is suitable for intermittent combustion and must only be used
with fuels having the characteristics described in this manual.
- The room where the stove is installed must have openings or air inlets communicating
with the outside of the house and able to ensure a sufficient air change.
- Never close the combustion air inlet and fume outlet openings.
- Do not handle easily flammable or explosive substances in the vicinity of the stove when it is operating.
- During operation, the intense heat generated by combustion of the wood makes the outside surfaces of
the stove very hot, and in particular the fire door, handle, fume exhaust pipe and cover. Therefore avoid
contact with these parts without suitable protection.
- Keep objects which are not heat resistant at a suitable distance.
- Clean the ash pan regularly.
- Hot ashes must not be put in waste bins or left unattended outdoors.
- Warn children and guests about the hazards described above.
- In case of operation anomalies, relight the stove only after eliminating the cause of the problem.
The Manufacturer declines any liability for problems, breakage or accidents due to non-compliance
with or failure to apply the instructions given above and in the manual
1.3 Technical description
The Termo BEA is a heating stove with water chamber for heating the home through the water circuit and also
by natural convection.
The heating stove uses wood and meets the requirements of Standard EN 13240.
Structure: steel and cast iron
Heating chamber: steel and cast iron
Nominal heat output: 18.63 kW
Wood consumption: 5.84 kg/h
Efficiency: 71.65%
Fume outlet pipe: Ø 150 mm
Heating chamber capacity: 35 l
Weight: 160 kg (sheet metal version) 169 kg
(Maiolic version)
Ext. dimensions ceramic version: HxWxD 1066x545x507 mm
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cola Termo Bea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cola Termo Bea in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info