669019

Cola Betty Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
5 Betty
1.7 Dataplate
The dataplate is located on the back of the stove. It gives the following data :
- model;
- serial number;
- type of fuel;
- nominal heat output;
- CO measured with 13% O2
- thermal efficiency;
1.8 Instructions for ordering replacement parts
For the end-user:
Contact your service centre and/or dealer to order replacement parts.
For the dealer:
To request any replacement parts contact the Cola s.r.l. after-sales service and/or send a fax clearly specifying
the following data:
- stove model;
- serial number;
- date of purchase;
- list of replacement parts;
- details of faults encountered.
- All work on parts must be carried out by authorised and/or qualified personnel.
- Only use original replacement parts
1.9 Stove decommissioning
For disposal, the stove must be sealed inside strong packing; contact the local authority in charge of such
operations in order to proceed according to the current local regulations.
2 – TRANSPORT AND INSTALLATION
2.1 Packing, handling, shipment and transport
The stove can be lifted using a lift truck, inserting the forks (of suitable length) in the special spaces in the wooden
packing.
Make sure the equipment used for lifting and transport can take the weight of the stove, specified on the dataplate
and in this manual.
Avoid taking the load in areas where it could be a danger if dropped.
Set the stove down on the floor carefully without bumping, and position it in the required place; make sure the
floor can take the weight of the stove, otherwise contact a specialised technician.
2.2 Instructions for safe installation
The stove must be installed by a technician, taking into account the local, national and European regulations. The
stove must be placed on a floor able to take its weight; otherwise corrective measures can be taken according to
the advice of specialised technicians.
Do not keep flammable or heat-sensitive parts near the glass. The minimum front distance for the protection of
flammable objects is 80 cm. Flammable or heat-sensitive parts must be at least 20 cm from the side and the
back wall. If the support base is made of flammable material (wood, cork, etc.) a protection base in 2-3 mm thick
steel plate or a sheet of toughened glass must be provided.
2.3 Connection to the flue
The stove must be connected to the flue with connection supports place on the top part of the stove body and by
means of flue pipes readily available on the market. Connection to the chimney must be made using strong and
stable pipes at least 1.2-2 mm thick. The flue pipe must possibly be straight, to avoid pressure losses, and
towards the flue. The single parts of the exhaust gas pipe must be tight.
To ensure regular operation, the flue draught with stove operating must be between 10 and 14 Pa.
For maximum stove efficiency, a draught control or
damper should be installed in the
flue pipe or chimney.
Every unit must eliminate the fumes through its own flue; never use the same flue for several units.
- hourly consumption;
- flue pipe size;
- minimum safety distance;
- stove external dimensions;
- weight.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cola Betty at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cola Betty in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info