585029
32
Zoom out
Zoom in
Previous page
1/92
Next page
32
Use
CAUTION!
Do not overll the water reservoir. Never pour water into the water reservoir above the
MAX marking!
Never operate the device without water! The pump could be damaged if the device is
operated without water.
The espresso machine has no automatic discharge stop function. The espresso ma-
chine must be switched off manually as soon as the desired amount of espresso has been
brewed! Make sure that the espresso pot does not overow.
Do not operate the device unattended so that you can intervene immediately in the event
of any malfunctions (e. g. overow of the lter etc.).
Make sure that the water reservoir does not run empty if you are brewing espresso and
coffee at the same time. Switch the espresso machine off immediately if the pump gets
louder and only draws in air.
Danger of scalding! Make sure that the steam power control on the side of the device is al-
ways turned off before you switch on the device! Otherwise hot steam could escape from
the nozzle in an uncontrolled fashion.
Danger of injury! Parts of the device (e. g. the hotplate or steam nozzle line) will become
hot during use. Do not touch these parts during use!
Danger of scalding! Never open the water reservoir and lter compartment cover during
use! Hot steam or hot spray water may escape.
The coffee machine has a non-drip valve which only works in combination with the glass
coffee pot which is supplied with the device. Do not attempt to place other vessels under
the coffee discharge opening or to manipulate the non-drip valve in any way.
Danger of scalding! The steam emerging from the steam nozzle is hot! Always hold a vessel
under the steam nozzle when you activate it. Keep body parts away from the jet of steam!
Danger of injury! When frothing milk or heating up liquids, always turn up the steam power
control slowly so that the respective liquid in the container does not shoot out of the
container in an uncontrolled fashion!
If you want to brew coffee, you should make sure before switching on the device that
there is enough water in the water reservoir and that the permanent lter has been
inserted correctly and lled with coffee. This is the only way to ensure that the device will
work properly!
If you want to brew espresso, you should make sure before switching on the device that
there is enough water in the water reservoir, the portalter has been correctly lled with
espresso and inserted into the device correctly.
Danger of scalding! Be careful when you want to remove the portalter from the device
and remove the espresso powder. The portalter and espresso powder will still be very
hot after the brewing procedure!
Danger of scalding! Always allow the permanent lter to cool down rst before you re-
move used coffee powder!
01327_DE-GB-FR-NL_V1.indb 32 30.09.11 10:58
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coffeemaxx CM4625 - Z 01327 Coffee Maker 3 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coffeemaxx CM4625 - Z 01327 Coffee Maker 3 in 1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info