634273
16
Zoom out
Zoom in
Previous page
1/18
Next page
- 16 -
14. TROUBLE SHOOTING
Fault Remedial action
Motor does not run
check mains connection cable
Start on short grass or on an area which has already been mown.
Clean discharge channel/housing the mowing blade must rotate
freely. Disconnect the power supply first.
Correct the cutting height.
Motor power drops
Raise the cutting height, in long grass.
Clean discharge channel/housing.
Check the cutting blade’s sharpness, replace as necessary.
Grass catcher is not filled
Very long grass may require a higher cutting height.
Wet grass is more prone to clogging - allow the lawn to dry
Check the cutting blade’s sharpness, replace as necessary.
Clean the grille and fabric of the grass catcher, to improve air flow.
Clean the discharge channel / housing Disconnect the power first.
Wheel drive does not function
Adjust the flexible cable.
Check the V-belt / gears refer to your local service centre.
Check the drive wheels for damage.
Warning: before performing any maintenance or cleaning work, always pull out the mains plug and
wait until the cutter has come to a standstill.
CAUTION! Faults which can not be rectified with the aid of this table may be rectified by a Cobra
Service Centre only.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MX46SPE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MX46SPE in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info