521981
15
Zoom out
Zoom in
Previous page
1/33
Next page
Operating Your Radio
25
Nothing Comes Close to a Cobra
®
ATIS ID Programming
24
English
Bluetooth
®
Mode Pairing
and Programming
Operating Your Radio
Bluetooth Radio On/Off
This setting allows you to turn On and Off the small Bluetooth
radio inside this VHF radio. The default setting
is ON. Turning it Off can save some power. It can easily
be switched On at any time.
To Set Bluetooth On and Off:
1.
Display will show the word blue and ON or OFF flashing.
2.
Press Channel UP/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to save this entry.
You have now ended Bluetooth Setup mode programming
and will enter ATIS ID programming.
Bluetooth Radio On
Bluetooth Radio Off
ATIS ID Programming
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio
is used to identify marine vessels in some inland waterways of European countries
that require ATIS transmission. An ATIS ID number is required to operate the ATIS
feature. The ATIS ID number is derived from your vessels call sign. You must enter
your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements. The use of
ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.
With this feature activated the vessels ATIS ID number is transmitted after every
push of the Talk button.
Channel Up/Down Button
ATIS ID Number Entry
To Set the ATIS ID Number:
NOTE
The ATIS ID is a 10 digit number that will always
begin with the number “9.” You will be asked to enter
only the last nine digits. The first digit, “9”, has been
automatically entered for you.
1. With the radio turned Off; press and hold the Channel
Down and SCAN buttons and simultaneously power
On the radio.
2. The LCD will display and flash the ATIS icon.
A dash (-), to the right of the digit “9”, will be flashing
for the next entry.
NOTICE
Remember, you only have one (1) attempt
to set the ATIS
ID number. Once this number has been entered, only your
Cobra distributor can reset the ATIS ID number. You can also
return the radio to Cobra for reprogramming.
3. Press the Channel Up/Down button to scroll through
the specific ATIS digit being entered.
4. Pressing the Call/Enter/Setup button advances to the
right, one (1) digit, for the next entry.
5. Repeat this input sequence until all nine digits have
been entered. The ATIS icon will stop flashing when a
successful ATIS ID entry has been made.
6. Press the Call/Enter/Setup button again, after all
numbers have been entered, to save the ATIS ID
number and return to the Marine Standby mode.
ATIS ID Start Screen
and SCAN Buttons
Channel Down
MRHH475EU_MANL_vC.qx:MRHH475_ENG_Body 12/28/09 9:44 AM Page 24
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH475 FLT BT EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH475 FLT BT EU in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cobra MR HH475 FLT BT EU

Cobra MR HH475 FLT BT EU User Manual - German - 66 pages

Cobra MR HH475 FLT BT EU User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info