521981
13
Zoom out
Zoom in
Previous page
1/33
Next page
21
Nothing Comes Close to a Cobra
®
Roger Beep Mode
Call Tone Select
VHF Marine Radio Protocols
Operating Your Radio
20
English
Setup Mode Programming
Call Tone Select continued
To Set Call Tone:
1. From the previous press of the Call/Enter/Setup button,
the LCD will display the letter “C” and the current Call
Tone number (01 through 10).
2. Press the Channel Up/Down button to select a different
Call Tone. An example of each call tone will sound for
1.5 seconds.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
NOTE: Call Tones are not usually used for Marine
VHF communications. We allow you to turn it On for
your unique communication needs.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
when you release the Talk button. This alerts your listener
that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1. Display will show ROG icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
ROG will be displayed when On.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a
button is pressed or you change a setting.
To Set Key Tone On or Off:
1.
Display will show Key Tone icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
ATIS Mode
ATIS mode allows control over ATIS packet transmissions. This
mode is only visable after initial ATIS set-up (see page 25).
To Set ATIS On or Off:
1.
Display will show ATIS icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
You have now ended Marine (VHF) Setup mode
programming and will enter Marine Standby mode.
NOTE: Scan and Tri-Watch features are not available
when ATIS is on.
VHF Marine Radio Protocols
Operating Your Radio
Bluetooth
®
Mode Pairing
and Programming
Bluetooth
®
wireless technology is a standard which has been developed for use
in mobile phones and other devices. This radio can be wirelessly linked to your mobile
phone if your mobile phone also has Bluetooth. This process of linking your mobile phone
and this radio is called “Pairing.” Once paired, this radio can act as
the speaker and microphone of your mobile phone while your phone is stowed
in a safe and dry location.
This programming section shows you how to complete the pairing process. It also shows you
how to change some settings related to the Bluetooth functionality of your radio.
Pairing Your Mobile Phone:
1. Press and release the Bluetooth button to enter Bluetooth
Standby. The LCD will change from VHF Standby mode
display to Bluetooth Standby mode display. The word “bLUE”
will be shown on the display and the blue keypad backlight
will come On.
2. Press and hold the Bluetooth button on the HH475BT for four
(4) seconds [until the radio beeps four (4) times] from the
Bluetooth Standby mode. The blue backlight will flash for
some time. Your radio is now in a “Pairing Mode” and can be
“found” by your phone.
While in pairing mode, the LCD will display the sequence as
shown in the illustration below.
3. Follow the mobile phone’s instructions to search for available
pairing with another Bluetooth device. This can often be found
in the Tools or Settings menu of your mobile phone.
Enter the “P.I.N.” (Personal Identification Number 0000), on
your mobile phone when prompted. Wait for the pairing
process to complete.
Bluetooth
®
Mode Pairing and Programming
Bluetooth Standby Mode,
Unpaired State
Key Tone Mode
Bluetooth Standby Mode,
Paired State
Bluetooth Pairing Mode
Sequence
ATIS Mode
MRHH475EU_MANL_vC.qx:MRHH475_ENG_Body 12/28/09 9:44 AM Page 20
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH475 FLT BT EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH475 FLT BT EU in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cobra MR HH475 FLT BT EU

Cobra MR HH475 FLT BT EU User Manual - German - 66 pages

Cobra MR HH475 FLT BT EU User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info