538285
30
Zoom out
Zoom in
Previous page
1/40
Next page
Sending A Position Send
Position Send uses your connected GPS in similar
fashion to the position request function, except that
you initiate the activity to let another station know
where you are.
To Send A Position Send Message:
1. In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
POS SEND
(position send).
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
POS SEND
(position send). You will have two (2) choices.
Resend your position to the same station.
Exit from Position Send mode.
To Resend Your Position:
1. Use the Up/Down buttons to select
SEND.
2. Press the Call/Set button to resend your position.
To Exit From The Position Send Mode:
1. Use the Up/Down buttons to select
EXIT.
2. Press the Call/Set button to return to the
Call Send menu.
Receiving A Position Send
When another station sends you its position in Position
Send mode, the individual alarm will sound and the station’s
name and position will be shown on the LCD. Press any
button to turn Off the alarm and return to Standby mode.
Digital Select Calling (DSC)
Operation
55
Operating Your Radio
Transmit Position
Send/Exit
Position Send
Standby Mode
Individual Directory
Position Send
Nothing Comes Close to a Cobra
®
54
English
Digital Select Calling (DSC)
Operation
Operating Your Radio
Call Log and Distress Log
Call Log functions similarly to the caller ID function on your
telephone. It will capture the caller’s MMSI identification
number and any other data included in a DSC message.
NOTE
The call waiting memory can hold up to 20 messages.
Once the memory becomes full, each new call will erase
the oldest call information on a
first-in first-out basis.
To Review Call Log Messages Received
While In DSC Standby Mode:
1. From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to
CALLLOG
3. Press the Call/Set button to enter the Call Log mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to move from message
to message in the call log memory.
5. Press the Call/Set button to return to Standby mode.
To Clear Messages From The Call Log Memory:
1. From Standby mode, press the Call/Set button
to enter the Call Send menu.
2. Use the Up/Down buttons to scroll to
CALLLOG
(call waiting).
3. Press the Call/Set button to enter the Call Log mode.
NOTE
The fourth line will show the type of message.
4. Use the Up/Down buttons to select the message
you want to delete.
5. Press and hold the Memory Scan/Memory Clear button
for one (1) second or more. Repeat steps 4 through 5 to
delete additional messages.
All Messages Viewed
Call Log Menu
Unread Messages
F55D_Operation_Eng:8186-F55_Operation-Eng 12/8/10 8:25 AM Page 64
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F55-D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F55-D in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info