538285
29
Zoom out
Zoom in
Previous page
1/40
Next page
Digital Select Calling (DSC)
Operation
53
Receiving A Position Request
When you went through the DSC set-up process, you set a position request reply
type. (See page 52 to change your setting.) Depending on the setting you chose,
when a Position Request message is received, your radio will enter either:
The Auto Reply mode.
The Manual Reply mode.
When The Radio Is In Auto Reply Mode:
A position request will sound the position request
alarm and show the name of the requesting station
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS DATA (no position data),
if you do not have a GPS device connected.
Press any button to silence the alarm and
exit the display.
When The Radio Is In The Manual Reply Mode:
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
Reply and send your position.
Exit without sending your position.
If You Choose To Reply With Your Position:
1. Use the Up/Down buttons to select
REPLY.
2. Press the Call/Set button to send your position.
3. Press any button to return to Standby mode.
If You Choose Not To Reply:
1. Use the Up/Down buttons to select
EXIT.
2. Press the Call/Set button to return to Standby
mode without sending your position.
Resend The Request
Operating Your Radio
Nothing Comes Close to a Cobra
®
52
English
Digital Select Calling (DSC)
Operation
Sending A Position Request continued
Choose one (1) of the following:
If You Receive A Position:
The requested position with the station name
and MMSI will show on your screen.
Press the Call/Set button to return to Standby mode
after you have noted the station’s position.
If The Station You Called Cannot Send Its Position:
NO POS DATA (no position data) will show
on your screen.
1. Press the Call/Set button to return to the
Individual Directory menu.
2. Use the Up/Down buttons to scroll to
EXIT.
3. Press the Call/Set button to return to the
Call Send menu.
4. Use the Up/Down buttons to scroll to
EXIT.
5. Press the Call/Set button to return to
Standby mode.
If The Station You Called Chose Not To Reply:
NO REPLY will show on your screen.
You will have two (2) choices:
RESEND the request.
EXIT the Position Request mode.
To Resend Your Position Request:
1. Use the Up/Down buttons to scroll to RESEND.
2. Press the Call/Set button.
To Exit The Position Request Mode:
1. Use the Up/Down buttons to scroll to EXIT.
2. Press the Call/Set button to return to the
Individual Directory menu.
3. Use the Up/Down buttons to scroll to EXIT.
4. Press the Call/Set button to return to the
Call Send menu.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to
Standby mode.
Operating Your Radio
Receiving a Position
No Position Data
Position Request
Position Request
Reply/Exit
F55D_Operation_Eng:8186-F55_Operation-Eng 12/8/10 8:25 AM Page 62
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F55-D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F55-D in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info