634434
18
Zoom out
Zoom in
Previous page
1/32
Next page
The chain life of the saw chain mainly depends upon sufficient lubrication
and correct tensioning.
Avoid tensioning the chain if it is hot, as this will cause the chain to become
over tensioned when it cools down.
WARNING! Tensioning the chain too tightly will overload the motor and
cause damage, insufficient tension can provoke chain derailing, whereas
a chain tightened correctly provides the best cutting characteristics and
prolonged work life.
Check the tension regularly because the chain length tends to stretch with use
(especially when the chain is new; after the first assembly, the chain tension must be
checked after 5 minutes of machine operation); in any
case do not tighten the chain
immediately after use, but wait until it cools down.
In cases where the loosened chain needs to be adjusted, always unscrew the adjustable
outside ring before adjusting the chain tensioning screw/knob; adjust the tension and
tighten the bar retaining the nut/knob accordingly.
1). Place the chain saw on any suitable flat surface. Screw adjustable outside ring
clockwise until the SDS system is screwed tightly. The
correct chain tension will be reached automatically. The
ratchet mechanism prevents the chain tension from
loosening. (See Fig. 13)
2). The correct chain tension is reached when the saw chain (24) can be raised approx.
2-3 mm from the guide bar in the centre. This should be
done by using one hand to raise the saw chain against
the weight of the machine. (See Fig.14)
3). When the saw chain loosens, unscrew the adjustable outside ring absolutely and then
screw on the side cover with the locking knob tightly again.
14
13
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CS35E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CS35E in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info