634434
16
Zoom out
Zoom in
Previous page
1/32
Next page
Your chainsaw is supplied with an SDS system for quick
assembly
and easy
adjustment
of
the chain tension. The
adjustable outside ring (13) adjusts the tension of the
saw chain and the locking knob (14) tension the bar. (See
Fig.8)
1). Unpack all parts carefully.
2). Place the chain saw on any suitable flat surface.
3). Pull back on the chain brake lever to deactivate the
chain brake.
4). Unscrew counter-clockwise the locking knob of the SDS
to remove the side cover. (See Fig.9)
5). Spread the saw chain out with the cutting edges (A) of the chain pointing in the
direction of rotation. Slide the s
aw chain into the slot around the chain bar.
Ensure chain is in the correct running direction. (See Fig.10a, 10b)
3.1.1 Mounting guide bar and chain
Attention: Wear gloves when handling the saw to prevent accidents relating to the the
chain and bar spikes that are extremely sharp.
Attention: Do not plug the machine in to the power source during assembly.
WARNING! Assembly methods according to the type of your machine, so please
take care to refer to the illustrations and machine type marked on the label. Take great
care when assembling to ensure this is performed correctly.
3.1 Preparation of the chainsaw
3. Instructions for use
8
9
10b
10a
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CS35E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CS35E in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info