Manual Cloer 5340 (page 8 of 33) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish)

767844

Zoom out

Zoom in

1/33

14 15

timer is on. If the symbol is not shown, this function

is deactivated.

Advice

If no more buttons are pressed, the display goes

into sleep mode to save energy after 1 min. Press

any key to bring the display out of sleep mode.

Preparing the machine

• Pour the desired amount of fresh, cold water into the wa-

ter tank with the aid of the glass jug min. 2 cups (250ml),

max. 12 cups (1500ml). Please refer to the water level

indicator for your desired amount of water, since this

indicator takes into account the amount of water that is

absorbed by the ground coffee and therefore lost.

CAUTION! Never fill the water tank with

more than 12 cups. Risk of scalding due

to bubbling over!

• Place the jug on the hotplate under the swivel filter.

• Rotate the filter forwards.

• Put in a paper filter bag, size 1x4.

• If you do not wish to choose any grinding function,

put your desired amount of ground coffee into the

paper filter. We recommend about 6.5 g of ground

coffee per cup (125 ml) for a normal coffee.

• Please only fill the swivel filter with up to a maximum

of 100 g of ground coffee, otherwise the water will not

be able to pass through and the filter will overflow.

• Now close the swivel filter. Listen for a click. It is only

correctly engaged once it has clicked shut.

• Now choose Grinding Function / No Grinding

Function by lightly pressing the Grind/Brew knob

until you see the corresponding symbol at the top

left of the display.

• If the symbol (BEAN) appears, the grinding functi-

on is on. If the symbol (Spoon with powder) appears,

the grinding function is off.

• If you select the grinding function, please check that

there are sufficient coffee beans in the coffee bean

container.

• Choose your desired coffee strength by lightly pres-

sing the Potency button until you see the corre-

sponding symbol underneath the time on the display.

•

weaker (6% less ground coffee)

•

normal

•

strong (6% more ground coffee)

• Select the number of cups you want (2-12) by lightly

pressing the knob (2-12 cups) until you see the cor-

responding number at the bottom left of the display.

• Choose Keep Warm Function / No Keep Warm

Function by lightly pressing the 15 , until you see the

corresponding symbol on the display.

• No Keep Warm Function: The hotplate will not

come on unless the symbol is showing.

• The keep warm function means that the hotplate

is active and will turn itself off again after 30 min.

• When brewing is complete and you have selected

the keep warm function previously, a countdown will

be displayed to inform you of the time that the keep

warm function will remain on. Keep warm count-

down from 30 min to 1 min.

Starting up the machine

• Now press the START/STOP button , and the

display will light up.

• The device will now grind the quantity of beans nee-

ded for brewing the number of cups selected.

• The ground coffee produced falls into the filter and is

brewed with hot water, after which the coffee trickles

into the glass jug.

• If the grinding function is switched off, the previous

step is omitted and the ground coffee that you have

put in is brewed.

• The LCD display keeps you informed of the current

state of brewing.

• If you wish to interrupt the brewing process, press

START/ STOP. Please be sure to resume the brewing

within 3 min., otherwise the machine will turn off.

• The anti-drip feature allows you to serve coffee, even

during brewing. However, we recommend that you

wait until the end of the brewing process for optimal

aroma.

• If you do wish to serve coffee before this, we recom-

mend that you interrupt the brewing process (Start/

Stop).

• The coffee is ready when the brewing process is com-

plete. The coffee will then be kept warm on the hot-

plate, unless this function has been switched off.

• After the brewing process has finished, the “Clean

Filter” symbol appears. Please remove and dis-

pose of the paper filter.

• You can also switch the coffee machine off manual-

ly, before the keep warm function has turned off, by

pressing the START/STOP button again.

• The filter symbol disappears as soon as the swivel fil-

ter has been open for at least 4 seconds and is then

shut again. (A click sounds.)

• Make sure that the filter cleaning symbol has disap-

peared before using the machine again.

Cleaning

• On the grounds of safety, always take the mains plug

out before cleaning, and let the device cool down.

• Never put the device in the dishwasher. Never immer-

se the appliance in water or any other liquid!

• Wipe the housing with a damp cloth.

Caution! Sharp Edges!

Regularly remove coffee bean remains

from the grinding mechanism.

To do so, proceed as follows:

• Please remove the beans left in the container.Turn the

grinding mechanism lock anticlockwise until the arrow

points to the symbol (open lock), and take the grin-

ding mechanism lock out.

• Now turn the grinding level setting knob until the

arrow points to the red dot. Now push the arrow

downwards and turn the grinding level setting knob

clockwise until the top grinding mechanism has been

screwed out. Keep the arrow pushed downwards the

whole time while doing this.

• You can now clean the grinding mechanism with a

paintbrush and/or a cloth.

• Now put the top grinding mechanism back in. Please

make sure that both hooks grip the underside cor-

rectly in the corresponding recesses.

• Turn the grinding mechanism setting knob anticlock-

wise until it snaps into place. The top grinding me-

chanism is now secure.

• Now put the grinding mechanism lock back in and

turn it anticlockwise until the arrow points to the

symbol (locked lock).

• Now select your desired grinding level again and fill

the bean container with coffee beans.

• Please note: When the finer grinding levels are used,

the route from the grinding mechanism to the cof-

fee filter can quickly become clogged. Therefore,

the device and the conical grinder should be clea-

ned more often.

• Clean the filter basket and the jug in warm was-

hing-up water, then rinse both thoroughly with water

and let them dry.

• Do not use any scrubbing sponges made of metal, clea-

ning sprays, or any strong detergents or scouring agents.

Static charge of the ground coffee

Due to the abrasion that takes place in the coni-

cal grinder, it is unfortunately unavoidable that the

ground coffee becomes charged. This means that it

some of it may remain stuck in the ground coffee out-

let above the coffee filter.

Please remove this ground coffee residue with a

paintbrush or a cloth.

Limescale removal

Advice

The lime content of drinking water varies from

region to region. Please inquire about the water

hardness level at your waterworks or public utility.

Hard water requires more frequent limescale remo-

val, while soft water requires less frequent descaling.

The coffee machine should be descaled at regular

time intervals where water contains lime (depending

on the level of water hardness, approx. every 3-4

weeks). Regular limescale removal keeps the electri-

city consumption low and lengthens the service life

of your coffee machine. Use a customary limescale

remover when descaling and follow the instruction

for use of this product.

Please observe the following when removing

limescale with vinegar:

• Put about 6 cups of water and about 150 ml of vine-

gar in the water tank and switch the device on.

• After descaling, let 6 cups of clear water run through

the machine, twice, to rinse it out.

• No warranty claims shall be valid for improper

function due to the build-up of limescale.

Error messages:

• E1 and E2: Unplug from the mains. Clean the filter

and the ground coffee outlet. After at least 5 seconds,

plug in again.

• E3: The grinding mechanism is blocked and the machi-

ne is overheated: Unplug from the mains. Let the machi-

ne cool down and clean the grinding mechanism.

• E4: The filter is not in the right position. Open the

filter, wait for 4 seconds and shut the filter until you

hear the click. If the error message reappears: Unplug

from the mains, check the filter and the filter unit.

Start the machine up again after at least 5 seconds.

• E5: The grinding mechanism lock is not engaged.

Please disconnect from the power supply, take out

and put the grinding mechanism and grinding me-

chanism lock back in again. Connect the power sup-

ply and start the machine up again after 5 seconds.

ENEN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cloer 5340 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cloer 5340 Manual

Product: