773865
8
Zoom out
Zoom in
Previous page
1/12
Next page
3.7 KEY BLOCK FUCTION
This function enables to block the controls. To set this function, do as follows:
a) Press the 'OK/mode' button for a few seconds until (Configure Time) is displayed.
b) Repeatedly press the button until is displayed and then press the 'OK/mode' button.
c) Press the button until is displayed and then press the 'OK/mode' button.
The display now shows to indicate the controls are now locked.
To unlock the device, wait until the dashes disappear and the display shows the temperature then press
and hold down the ' /esc' button for 5 seconds until the dashes are shown again, now press the button
to confirm.
3.8 SOUND FUNCTION
The SOUND function enables you to activate and deactivate the beep emitted on touching the buttons. To
activate or deactivate the sound do as follows:
a) Press the 'OK/mode' button for a few seconds
b) Repeatedly press the button until is displayed and then press the 'OK/mode' button.
c) Press the button to select (to activate) or (to deactivate) the beep and press the 'OK/mode'
button to confirm.
3.9 OTHER INFORMATION
If you enter a submenu, and stop using the device for a few seconds, it will automatically return to the main
menu.
If you are in the main menu, and the device is not being manipulated; it will turn to stand-by mode and the
display will only show a dot. To turn on the screen again, press any key on the button panel.
Even if the device is in an OFF cycle, the radiator can still start working. This is because it has a minimum
frost protection set temperature as per factory set to 7ºC. This mode is called FROST PROTECTION and it
prevents the room temperature going below 7ºC temperature.
The device also has a built in sensor that detects any sudden temperature changes that may occur, i.e. when
a window is opened, air conditioners activated, or any other circumstance that may prevent the radiator from
raising the room temperature. This mode activates when the temperature decreases by 3ºC in 5 minutes. At
this stage, the radiator turns off and shows on the display; this mode stays until this decreasing
tendency disappears.
5. Cleaning and Maintenance
The radiators do not require any special maintenance providing thermal comfort during large periods. Dust
clean with a dry, soft cloth only when the unit is disconnected and cold.
At the beginning of the year’s heating season, vacuum any dust that has accumulated in the inner heating
element while the radiator has been off for long periods during warmer weather.
Do not use solvents or abrasive products for cleaning.
After the heating season turn off the radiator with the switch located on the right side of the radiator.
This inertia radiator has been manufactured under an assured quality system using environment friendly
processes.
Disposal: Please take the radiator to a recognised disposal point so any useful material is recycled in the
right way.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Climastar Silicium Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Climastar Silicium Touch in the language / languages: English as an attachment in your email.

The manual is 1.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info