468920
9
Zoom out
Zoom in
Previous page
1/21
Next page
What each button/channel does
Your Concept 50x remote controls come pre-programmed so that certain channels
command certain functions. If you wish, you can actually assign any channel to any
function (see pages 16-20). The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmitting
channel
number:
Causes the system to:
Press the
LevelShift
button?
How
many
times?
Press
button
number
1
arm or disarm and lock or unlock the doors no 1
2
optionally turn on a timed device (if the system is armed)
AND
optionally pop the trunk (if the system is disarmed)
no 2
3
silently arm or disarm no 3
4
activate an optional accessory no 4
5
arm or disarm a Concept 50x on your second vehicle yes once 1
6
Command a Concept 50x on your second vehicle to
optionally turn on a timed device (if the system is armed)
AND
optionally pop the trunk (if the system is disarmed)
yes once 2
7
activate an optional accessory
controlled by a Concept 50x on your second vehicle
yes once 3
8
activate another optional accessory
controlled by a Concept 50x on your second vehicle
yes once 4
9
enter/exit valet mode yes twice 1
10
remotely turn off one or both sensor zones yes twice 2
11
activate an optional accessory
controlled by a Concept 50x on your third vehicle
yes twice 3
12
activate another optional accessory
controlled by a Concept 50x on your third vehicle
yes twice 4
TO ARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) once. You will hear
two chirps
and the
indicator lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock.
TO DISARM
THE SYSTEM . . . . . . .
Press button 1 (channel 1) again. One chirp and one indicator
light flash confirms disarming. In addition, the doors will auto-
matically unlock and the interior lights will turn on and stay on
for 30 seconds or until you start the engine, whichever occurs first.
7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clifford Concept 50X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clifford Concept 50X in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info