Table of user-selectable features: 1 chirp = OFF, two chirps = ON.
Feature Select
Column 1
1st latched
Column 2
2nd latched
Column 3
3rd latched
Column 4
4th latched
Row 1
1st momentary
Add new remote to channel 1
info on page 9NOTE 1
AutoLock
on
/off
info on page 12
AutoArming:
on
/off
info on page 11
Sound 1:
on
/off
info on page 16
Row 2
2nd momentary
Add new remote to channel 2
info on page 9
NOTE 2
AutoUnLock on/off
info on page 12
AutoArm & Lock: on/off
info on page 11
Sound 2: on/off
info on page 16
Row 3
3rd momentary
Add new remote to channel 3
info on page 9
NOTE 3
FACT: on/off
info on page 12
NOT USED
Sound 3: on/off
info on page 16
Row 4
4th momentary
Add new remote to channel 4
info on page 9 NOTE 4
AutoActivate timed channel 4 accessory
upon remote arming: on/off
this feature is for installers only
✱Set accessory timer duration:
1sec - 2min (30sec)
info on page 9NOTE 6
Sound 4:
on
/off
info on page 16
Row 5
5th momentary
Erase all channels
info on page 19 NOTE 5
QuietChirps: on/off
info on page 16
NOT USED
Sound 5: on/off
info on page 16
Row 6
6th momentary
NOT USED
Long-term chirp silencing: on/off
info on page 16
Set a new secret valet code
info on page 13-14NOTE 7
Sound 6: on/off
info on page 16
✱ WARNING: If you have remote window and sunroof closure, DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.
DO NOT alter the installer-only setting in the gray cell. There is also an installer-only column 5, so if you accidentally select an installer-only feature, turn off the ignition and start again.
NOTE 1:
Transmit channel 1 (or other channel of your choosing) of the new
remote control. You will hear one chirp to confirm programming of channel 1.
NOTE 2:Transmit channel 2 (or other channel of your choosing) of the new
remote control. You will hear two chirps to confirm programming of channel 2.
NOTE 3:
Transmit channel 3 (or other channel of your choosing) of the new
remote control. You will hear three chirps to confirm programming of channel 3.
NOTE 4:Transmit channel 4 (or other channel of your choosing) of the new
remote control. You will hear four chirps to confirm programming of channel 4.
NOTE 5:When you hear one chirp, all remotes will have been erased from the
system memory. You must now add the new and/or existing remote controls to
the system (i.e., program channels 1–4 of each remote that will be used with
your Concept 50x).
NOTE 6:The accessory timer starts as soon as you select this feature. When the
duration you wish has been reached, press button 1 on the remote control. You
will hear two chirps to confirm the new accessory timer duration.
NOTE 7:
Immediately flip the switch to its latched position, then:
a.Enter the new code that you wish to use. The system will sound the same
number of chirps as the digit you choose when you move the switch to the
latched side (e.g., if the first digit is 4, you’ll hear four chirps when you
press the latched side).
b.Make sure to return the switch to its center position when complete.
c.Wait 3 seconds until you hear 2 chirps, indicating the new code has been
accepted.
d.Turn the ignition off. You’ll hear 3 chirps to confirm program mode exit
and the LED will turn off.
e.VERY IMPORTANT:You must immediately test your new secret
valet code: Turn the ignition on, enter your new code, then flip the switch
to its latched position. The LED will illuminate. If it does not, the new code
you programmed and the one you just entered do not match. The system
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Clifford Concept 50X at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Clifford Concept 50X in the language / languages: English as an attachment in your email.
The manual is 0,12 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
