684051
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
Control voltage supply
CAUTION!
Before connecting, ensure that the mains voltage corresponds with
the
control voltage of the unit (230 V/1 50…60 Hz).
The steam generator must only be connected to a mains supply with a
protective conductor.
The connection to the control voltage is made in accordance with the wir-
ing diagram, to the terminal block “XE3” in the control compartment. The
customer is to install a service switch “Q9” in the supply line (all pole dis-
connecting device with a minimum contact opening of 3 mm) and an “F9”
fuse (max. 10 A slow acting) (these are both essential requirements).
The cross-section of the mains cable must comply with the applicable
local regulations (minimum of 1.5 mm
2
).
Remote operating and fault indication H1 (Option “RFI”)
The remote operating and fault indicators must be connected to the respec-
tive potential-free relay contacts of
the remote indicator board according to
the wiring diagram:
“Error”: This relay is activated if an error is present.
“Service”: This relay is activated when the set service interval has
expired.
“Steam”: This relay closes as soon as the unit produces steam.
“Unit On”: This relay closes as soon as the unit is switched on via the
unit switch.
The maximum contact loading is 250V/8A.
Appropriate suppressor modules are to be used for the switching of relays
and miniature contactors.
Remote temperature indication (U1)
Analogue output 0...10 V (0...100 °C) for remote temperature indication.
Analogue output ap actuator U2
Analogue output 0...10V (open...closed) for the control of the ap actuator.
The ap actuator is connected to the appropriate terminals on the remote
operating and fault indication board according to the wiring diagram. The
output signal is always active.
The cross-section of the connecting cable must comply with the applicable
local regulations.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleopatra Cleo Premium Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Cleo Premium Pro in the language / languages: English as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info