462050

ClearOne PRO 8i Manual

227
Zoom out
Zoom in
Previous page
1/345
Next page
222
Signal Generator
The Signal Generator tab enables you to generate test signals to audibly test signal paths, gain settings, routing,
and channel configuration settings. The signal generator can also be used for noise masking in courtroom, clergy,
and corporate applications.
NOTE: When the signal generator is on for any unit in the site, the Signal Generator LED
on the Console Button Bar flashes green.
Test Signal Types
The signal generator provides three types of test signals: Pink, White, and Tone.
Pink Noise• : A test signal containing all the frequencies in a given audio spectrum, with equal energy in each
octave. Pink noise is the default signal.
White Noise• : A test signal with equal energy distribution throughout a given frequency range.
Tone• : A sine-wave test signal with less than .03% distortion. Selecting Tone with the Signal Selection slider
activates the Frequency configuration section of the tab.
Linear Sweep Sine Wave: • A test signal increasing in frequency using predefined steps.
Log Sweep Sine Wave: • A test signal increasing in frequency using exponential steps (rises on a curve).
Running a Signal Test
Use the following procedure to run a signal test:
Select the unit and channel to test using the unit and channel drop down lists.1.
Select the type of test tone using the 2. Signal Selection slider.
Select the amplitude (volume) of the test tone using the 3. Amplitude slider. The amplitude range is from -60 to
+20dB. The default is -20dB.
Set the level for the test tone using the dB entry field or up/down arrows.4.
Set desired test tone duration using the 5. Signal Timeout entry field.
For 6. Tone signals, set the additional Frequency settings as explained in the next section.
Press the 7. Signal On button to initiate the test signal on the selected unit and channel. The signal will
… 227 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 8i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 8i in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info