462047
170
Zoom out
Zoom in
Previous page
1/345
Next page
165
Model User-Definable Pins
Control/Status Port A
User-Definable Pins
Control/Status Port B
8i 16 2
TH20 24 2
VH20 24 2
SR 1212 16 2
SR 1212A 16 2
Default Pin Assignments
For default pin assignments for Control/Status ports by model, refer to Appendix B.
Control/Status Ports
Control/Status A and B ports are female DB25 connectors used for General Purpose Input/Output (GPIO)
interactions between Converge/Converge Pro devices and external control devices such as wall switches and push-
to-talk microphones. Control programming enables external control devices and controller software to access the
Converge/Converge Pro serial command set, including common functions such as volume control, muting, room
combining, and running presets.
For more information on Control/Status Port A and B and other physical connections, see Controls and
Connections.
Control/Status Pin Programming
Use the following procedure to program user-definable pins:
In the 1. Control/Status Pin Select section of the screen, select port A or B from the Control Port drop-down
list.
2. Select the pin you want to configure from the Selected Pin drop-down list. (Pin 1 is selected by default for
Control Port A and Pin 21 is selected by default for Control Port B.)
3. In the Control Pin State section of the screen, press the Active (Low) Command or Inactive (High)
Command button to select the pin state that you want to associate a command with.
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info