646277

Cleanmaxx Z 09858 Manual

20
Zoom out
Zoom in
Previous page
1/48
Next page
EN 20
Operation
ATTENTION!
■ During use, never hold the nozzles near body parts or animals and do not reach into
them. The device could attach itself to them and you could be injured. If something
does get caught in the vacuum cleaner, turn the device off immediately (move the On/
Off switch to the 0 position).
■ Only turn on the vacuum cleaner once you are sure that all parts have been com-
pletely mounted and that all fi lters have been correctly inserted.
■ To prevent the mains cord from becoming hot during operation, pull at least two thirds
of its entire length out of the device before switching on the vacuum cleaner. To pre-
vent damage, do not forcefully pull the mains cord out up to the stop point (no further
than to the red mark on the cord)!
■ Always turn off the device fi rst and pull the mains plug out of the socket before you
change a nozzle or attach or remove other accessories!
■ Do not in any case vacuum up the following:
– liquids or wet substances (e.g. wet carpet shampoo)
– smouldering ashes, cigarette butts, matches etc.
– fl ammable or ignitable materials
– very fi ne dust (e.g. cement dust), ash or toner
– pointy, hard objects such as larger glass shards
1. If you would like to use one of the enclosed suction nozzles with the suction hose, at-
tach the desired suction nozzle to the suction hose (see chapter “Assembly”, section
“Attaching/removing suction nozzles” and the chapter “Product contents and device
overview”, section “Suction nozzles”).
2. Pull the mains cord (12) out of the housing – ideally up to the yellow mark, but no
further than up to the red mark on the cord!
Notice: You can hook the mains cord into the hook (10) on the handle for added safe-
ty when using the device.
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Move the On/Off switch (11) to position I to turn the vacuum cleaner on.
5. Push the vacuum cleaner over the area you intend to clean or take the suction hose
(3) out of the holder and move the nozzle over the area you intend to clean.
6. Once you have fi nished vacuuming, move the On/Off switch to position 0 to turn the
device off.
7. Pull the mains plug out of the socket, fi rmly hold the mains cord and push the switch
for the cord winder (14). By holding the mains cord, you prevent it from “whiplashing”
against body parts such as your legs.
8. For best performance of the device, empty the dust bin (4) after each use and clean
the cyclone insert (5), the motor fi lter and the HEPA exhaust air fi lter regularly (see
chapter “Cleaning and care”).
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 09858 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09858 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info