Manual Cleanmaxx Z 09666 (page 26 of 56) (English, German, Dutch, French)

646237

Zoom out

Zoom in

1/56

EN 26

3. Carefully remove the cyclone insert (B) from the dust con-

tainer.

4. Pull the ﬁ lter holder (C) out of the cyclone insert and re-

move the foam ﬁ lter.

Please note: The second motor ﬁ lter is attached to the

ﬁ lter holder and cannot be removed from the holder!

5. Tap out all the parts over a bin and brush away any loose

dirt.

6. If required, rinse out the ﬁ lters thoroughly with clear, lukewarm water.

Attention: Do not use any cleaning products!

Next shake off any surplus water and leave the ﬁ lters to air dry completely before

replacing them in the device.

7. You can clean the cyclone insert and dust container with a damp cloth.

8. When all parts are dry, replace the cyclone insert in the dust container.

Please note: There is an arrow symbol on the top of the cyclone insert. Place the

cyclone insert into the dust container so that this arrow symbol points to the

symbol on the dust container.

9. After drying, place the foam ﬁ lter back into the ﬁ lter holder and replace the holder

onto the cyclone insert.

Attention: Never put damp parts back into the dust container!

10. Put the lid on the dust container so that the arrow symbol

on the lid points to the

symbol on the dust container.

Close the lid by turning it as far as it will go. The arrow

symbol should now be pointing to the

symbol on the

dust container.

11. Put the dust container in the device. Make sure that it audibly locks into place.

If the ﬁ lters are damaged or worn you can order new ﬁ lters at

www.service-shopping.de.

Cleaning the HEPA exhaust air ﬁ lter

The HEPA exhaust air ﬁ lter is situated behind the protective grill on the back of the

vacuum cleaner.

1. Pull up the exhaust hatch latch (D) and remove the hatch

simultaneously.

2. Remove the ﬁ lter from the ﬁ lter compartment and tap

it out over a garbage bin. If necessary, clean it with a

soft brush. You can also rinse the ﬁ lter out under clear,

lukewarm warm water.

Attention: Do not use any cleaning products!

Next, shake off any surplus water and leave the ﬁ lter to air dry completely before

replacing it in the device.

3. Brush or wipe the ﬁ lter compartment if required.

4. Place the dry ﬁ lter back in the ﬁ lter compartment.

09666_de-en-fr-nl_V1.indb 2609666_de-en-fr-nl_V1.indb 26 28.08.2015 14:07:5328.08.2015 14:07:53

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09666 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 09666 Manual

Product: