Manual Cleanmaxx Z 09666 (page 25 of 56) (English, German, Dutch, French)

646237

Zoom out

Zoom in

1/56

25 EN

Cleaning and care

ATTENTION!

■ Empty the dust container when it reaches the MAX mark and clean the cyclone in-

sert, motor ﬁ lters and HEPA exhaust air ﬁ lter regularly in order to prevent the motor

from overheating.

■ Prior to cleaning the device, always pull the mains plug out of the socket.

■ Keep the device, the mains cable and the mains plug away from water or other liq-

uids in order to avoid the risk of electrical shock. When cleaning the vacuum cleaner

make sure that no liquid gets into the device. Only the ﬁ lters may be cleaned with

water. However, when ﬁ tted back into the device they must be completely dry.

■ The ﬁ lters are not suitable for the washing machine, dishwasher or dryer! Only air

dry the ﬁ lters and do not under any circumstances use a hair dryer.

■ Do not use any corrosive or abrasive cleaners or cleaning pads for cleaning. They

could damage the surface.

Over time the ﬁ lters may become discoloured. This is normal and does not

affect the functionality.

Emptying the dust container

1. Fold the carry handle of the device downwards.

2. Push the release button of the dust container and take it

out of the device by the handle.

3. Hold the dust container over an open dustbin. The dust

container should be as close as possible to the dustbin so

that the dust from the container falls only into the bin and

is not spread over the surrounding area.

4. Press the button to open the dust container. The bottom of the dust container will

open and the dirt will fall out.

5. Shut the dust container bottom again. The fastener must audibly lock into place.

6. Put the dust container in the device: Take it by the handle and insert it bottom ﬁ rst

into the device. Then push the handle towards the device housing until the dust

container audibly clicks into place. Hold the device by the dust container handle and

lift it up to check that the dust container is correctly locked into place.

Cleaning the cyclone insert and motor ﬁ lters

The cyclone insert is situated inside the dust container. The motor ﬁ lters are situated in

the ﬁ lter holder on the cyclone insert.

1. Remove the dust container from the device and empty it (see section “Emptying the

dust container”).

2. Turn the lid of the dust container as far as it will go in an anticlockwise direction.

Remove the lid.

09666_de-en-fr-nl_V1.indb 2509666_de-en-fr-nl_V1.indb 25 28.08.2015 14:07:5328.08.2015 14:07:53

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09666 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 09666 Manual

Product: