646280
27
Zoom out
Zoom in
Previous page
1/64
Next page
27
Cleaning the Device
CAUTION!
Empty the dust container if it is full and clean the lter regularly to prevent overhea-
ting of the motor.
Always remove the mains plug from the plug socket before doing any cleaning of
the device.
Keep the device, the cable and the mains plug away from water or other liquids in
order to avoid electric shocks. Make sure that no liquid gets into the device during
cleaning. Only the plastic dust lter and the exhaust air lter may be cleaned with
water. However, they must be completely dry before they are put back into the device.
Never clean the dust lter in the dust container lid using water or other liquids!
The lters are neither machine-washable, dishwasher-safe nor suitable for tumble
drying! Only ever dry the lters in the air, and never use a hair dryer to do so.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the
device. These could damage the surfaces.
Clean the dust lter, the plastic dust lter and the exhaust air lter regularly, or if you
notice a reduction in the suction power.
Clean the housing if necessary using a damp, soft cloth. Dry it with a soft cloth.
Remove hair and uff from the nozzles at regular intervals.
The lters may lose some of their colour over time. This is normal and does not
have any adverse effect on function.
Emptying and Cleaning the Dust Container
1. Detach the suction hose from the dust container (see „Assembly“ chapter, „Inser-
ting/Removing the Hose“ section).
2. Press the release button of the dust container and pull it
up out of the device by the handle.
3. Hold the dust container over an open dustbin. The distance
between the dust container and the dustbin should be as
short as possible to ensure that the dust from the dust
container falls into the dustbin only and does not spill into
the environment.
4. Press the button to open the dust container. The bottom
of the dust container will open and the dirt will fall out.
5. Close the bottom of the dust container again. The faste-
ner must be heard to engage in place.
6. If necessary, you can rinse the dust container and the plas-
tic dust lter with clear, lukewarm water. Turn the dust con-
tainer lid to remove it from the dust container. NOTE: On
the dust container and its lid there are arrows and closure
markings to make it easier for you to remove and attach
the lid. The lid can be removed when the marking on the
lid points to the opened lock symbol on the dust container.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08864 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08864 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info