646273

Cleanmaxx Z 08183 Manual

21
Zoom out
Zoom in
Previous page
1/48
Next page
21 EN
3. Pull the catch away from the dust container. The bottom of
the dust container will open and the dirt will fall out.
4. Close the bottom of the dust container again. The fasten-
er must be heard to engage in place.
5. Plug the closed dust container into the motor unit. Press
the dust container handle against the housing until it en-
gages audibly.
Cleaning the Dust Container Cyclone Insert and Motor Filters
The cyclone insert is located in the dust container. The motor fi lters (HEPA and foam
fi lter) are seated on the cyclone insert (20).
1. Remove the dust container from the device and empty it (see the “Emptying the Dust
Container” section).
2. Turn the lid of the dust container until the arrow marked
on the edge of the lid is pointed to the
symbol on the
dust container. Then, remove the lid.
3. Turn the HEPA fi lter (18) a little in an anticlockwise direc-
tion and remove it.
Please note: The HEPA fi lter is attached to the fi lter hold-
er and cannot be taken out of the holder!
4. Remove the foam fi lter (19).
5. Carefully remove the cyclone insert from the dust contain-
er. For this put your hand into the
dust container and push
the
cyclone insert up.
6. Tap out all the parts over a dustbin and brush off the loose
dirt.
7. If necessary, thoroughly rinse the fi lters using clear, luke-
warm water. CAUTION: Do not use any cleaning agent!
Then shake off any excess water and let the fi lters dry
completely in the air.
8. Clean the cyclone insert and dust container with a damp cloth.
9. When all parts are dry, reassemble them. CAUTION: Under no circumstances
should you place damp device parts into the dust container!
10. Place the lid onto the dust container so that
the arrow marked on the edge of the lid
is pointed to the
symbol on the dust container. Then
turn the lid as far as it will go
towards the
symbol
.
11. Insert the dust container into the device. Make sure that it audibly locks in place.
18
19
20
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08183 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info