650347
39
Zoom out
Zoom in
Previous page
1/88
Next page
39 EN
6. Loosen the catch on the HEPA lter and pull it off. The dust lter is located
behind it.
7. Empty out any coarse dirt over a waste bin.
8. Insert both lters again. When inserting the lters, make sure that they
are properly secured!
9. If necessary, clean the dust bin with clean, warm water. Then let it dry
completely before putting it back in the device.When putting it back in the
device, make sure that the dust bin is properly seated in the dust bin
compartment and that the handle is folded down.
10. Close the cover. It must audibly lock into place.
Cleaning the roller brush, rubber strip and nozzles
Over time, hair, threads or other dirt and debris may collect on the roller brush.
To remove them, take the roller brush out of the device.
If the roller brush is worn out, it must be replaced. A spare roller brush is included
in the product contents.
1. Remove any coarse dirt from the bottom side of the device.
2. Place the device upside down on the ground or a table.
3. Release the cover with the rubber strip (11) by pushing
the two catches together and folding the cover up.
4. Carefully take the roller brush (10) out of the
compartment.
5. Use the enclosed cleaning brush or a cloth to clean
the cover with the rubber strip, the roller brush, the
compartment and nozzles.
6. Then put the brush back in the holder and the compartment. Make sure that
the side of the brush with the square is inserted in the corresponding recess
in the compartment.
7. Place the cover with the rubber strip back on the compartment and push it
into place. The cover must audibly lock into place.
Replacing the side brushes
If the side brushes are worn, they must be replaced. Two spare side brushes
are contained in the product contents.
1. Remove any coarse dirt from the bottom side of the device.
2. Place the device upside down on the ground or a table.
3. Use a star-headed screwdriver to loosen the screws
on the side brushes.
4. Pull the side brushes off of the axles.
5. If necessary, clean the brush compartments.
6. Place the new side brushes on the axles and tighten
the screws.
06025_DE-GB-FR-NL_A5_V5.indb 3906025_DE-GB-FR-NL_A5_V5.indb 39 24.04.2015 10:12:2524.04.2015 10:12:25
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 06025 - VR-101A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 06025 - VR-101A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info