650347
35
Zoom out
Zoom in
Previous page
1/88
Next page
35 EN
Once the device has docked on the charging station, it will automatically start
to recharge. The indicator light on the charging station will switch from green to
red. The charge level indicator (19) on the display will light up and ash as long
as the device is charging. Once the rechargeable battery is fully charged, the
indicator will stop ashing and the display will turn off after approx. 30 seconds.
With the button (automatic charging) on the remote control, you
can tell the device to return to the charging station and recharge.
Functions
When the device is completely switched off (toggle switch is set to 0), all
settings will be deleted.
The device has four different vacuuming modes. You can use the menu button
on the device or the corresponding buttons on the remote control to select
these modes.
You can also use the directional buttons to steer the robotic vacuum cleaner
manually.
In each mode, the device will vacuum until the rechargeable battery is low. It will
then automatically locate the charging station.
The robotic vacuum cleaner has the following vacuuming modes:
Random cleaning mode: The robotic vacuum cleaner will travel
straight ahead until it encounters an obstacle, it will then veer off and
travel straight ahead in another direction.
Spiral cleaning mode: The robotic vacuum cleaner will begin by
travelling from the inside to the outside in an increasingly large
spiral. It will then travel from the outside inward in an increasingly
small spiral. Once it has reached its starting position, it will look for a
new area and begin the process again.
Edge cleaning mode: The robotic vacuum cleaner will move forward
until it encounters an edge (e.g. wall, piece of furniture), it will then
travel along this edge until it reaches the next edge.
Auto cleaning mode: The robotic vacuum cleaner will automatically
combine the three other cleaning modes.
Setting the time and day
1. To set the current time, simultaneously push the buttons and (22,
23) in standby mode.
2. The hour display will start to blink. Push the buttons (+1 hour) or (-1
hour) (23, 24) to set the hours.
3. Push the
)
button again. You can now set the minutes with the buttons
(+1 minute) or (-1 minute).
06025_DE-GB-FR-NL_A5_V5.indb 3506025_DE-GB-FR-NL_A5_V5.indb 35 24.04.2015 10:12:2424.04.2015 10:12:24
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 06025 - VR-101A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 06025 - VR-101A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info