562006

Cleanmaxx Z 04851 - 7001-INT-2 RoboMop Softbase Manual

17
Zoom out
Zoom in
Previous page
1/40
Next page
17
• Block the path to pieces of furniture that the device only just fi ts under, e. g. with fl ower
pots which are heavy enough that they cannot be knocked over. Also block access to any
stairs or similar hazards to ensure that the device cannot fall down them.
Operating the Device
PLEASE NOTE!
❐ Do not leave the device switched on unattended so that you can intervene if any furniture/
objects get in the way.
❐ When operating the device, close the door of the room in which the device is working.
❐ The device is not suitable for carpets.
❐ If during cleaning something gets stuck in the mop frame and impedes the device, switch
the device off immediately and remove the obstacle.
❐ If the device has come into contact with wet surfaces or water, switch it off immediately.
Have the device inspected before further use.
The device can mop up to 60 m² per hour.
1. Place a fl oor cloth fl at on the fl oor and place the mop frame
on the cloth. Press the mop frame down fi rmly so that the
Velcro fasteners on the bottom of the frame stick to the fl oor
cloth. Make sure that the receptacle and the fl oor cloth fi t
above one another (see illustration).
2. Place the mop frame in the middle of the room which is to be cleaned.
3. You should now set the cleaning time. To do this, press the ON/TIME button until the
desired time is shown on the display. The following sequence applies here:
– 1 x press 90 minutes run time 1:30 is shown on the display.
– 2 x press 60 minutes run time 1:00 is shown on the display.
– 3 x press 30 minutes run time :30 is shown on the display.
4. Once you have selected the cleaning time you want, place the robot ball into the mop
frame. After a few seconds, the device will switch on automatically.
5. Once the cleaning time which is set has elapsed, the device automatically switches itself off.
If you want to switch the device off manually, remove the robot ball from the mop frame,
take hold of the control panel and press the OFF button.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 04851 - 7001-INT-2 RoboMop Softbase at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 04851 - 7001-INT-2 RoboMop Softbase in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info