562277

Cleanmaxx Z 02759 - SG 5008S-5 Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
25
Cleaning and Care
CAUTION!
❐ Remove the plug from the mains socket before cleaning the device.
❐ After use, the device may still be very hot. Allow the device to cool down completely
before you empty the water reservoir and/or clean the device and store it away.
❐ Never immerse the device in water or other liquids!
❐ Never touch the device, the cable or the plug with wet hands.
❐ Do not use corrosive or abrasive cleaning agents or cleaning pads for cleaning.
These can damage the surface.
• Empty the water reservoir (see the "After Use" section).
• If necessary, wipe off the outside of the device with a soft, slightly damp cloth and
dry it with a soft cloth.
Self-Cleaning Function
If you do not use distilled water, perform the working steps which are described below
regularly (at least every 10 operating hours):
1. Move the steam quantity control to 0, move the temperature control to MIN and pull
the plug out of the plug socket.
2. Fill the water reservoir around half full with water (see the "Filling the Water Reser-
voir" section). Ideally you should only ever use distilled water for self-cleaning.
3. Place the device upright on a stable, fl at and heat-resistant surface.
4. Plug the mains plug into a properly installed, easily accessible mains socket and
move the temperature control to position MAX.
5. Wait until the device has heated up and the temperature control lamp goes out.
6. Move the temperature control to position MIN.
7. Remove the mains plug from the mains socket.
8. Hold the device horizontally over a sink or similar outlet.
9. Press the Self Clean button (12) and pull the steam quantity control unit out.
10. Allow the water reservoir to run completely empty. Tilt the device back and forth
slightly to allow the water to run out of all nozzles.
11. After the device has cooled down completely turn the device upside down in order to
remove any remaining amounts of limescale or water.
12. Insert the steam quantity control unit. Make sure it the steam quantity control unit
locks correctly into place.
13. If necessary, repeat the cleaning process several times until no more limescale resi-
dues emerge from the nozzles.
Separate descaling of the device is not necessary.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 02759 - SG 5008S-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 02759 - SG 5008S-5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info