562277
23
Zoom out
Zoom in
Previous page
1/56
Next page
23
5. As the device heats up, the temperature control lamp (15) lights up. Wait until the
device has heated up and the temperature control lamp goes out. The device is now
ready for use and you can start ironing.
Filling the Water Reservoir
CAUTION!
Always pull out the plug before you top up/empty the water reservoir. Always pull the
plug and never the cable.
Never pour any cleaning agent or other additives into the device. This could destroy
the device and safe working is no longer guaranteed.
Never exceed the maximum ll level (note MAX marking on the water reservoir!).
The useful service life of the device will be extended if you use pure distilled water.
1. Make sure that the device is not connected to the mains power. Move the steam
quantity control (11) to position 0 and the temperature control (5) to MIN. Turn the
little wheel until MIN is next to the operating lamp.
2. Open the water reservoir by opening up the water reservoir cover (10). Please note
that the cover cannot be completely detached from the device.
3. Place the device with the bottom of the iron (8) onto a at surface and tilt it back
slightly so that it stands on the rear edge of the housing.
4. Fill the reservoir up to the MAX marking (7) with the supplied measuring cup (17).
The reservoir holds approx. 350 ml.
5. Close the water reservoir by ipping the cover shut again. Make sure that the water
reservoir is completely sealed shut.
Steam-Ironing
CAUTION!
Never aim the steam directly at people, animals or plants. This can cause severe
scalding.
1. Fill up the water reservoir with water (see the "Filling the Water Reservoir" section).
2. Place the device to heat up upright on a stable, at, heat-resistant and moisture-
resistant surface.
3. Plug the mains plug of the device into a properly installed mains socket that is easily
accessible. The operating lamp (4) lights up.
4. Move the temperature control (5), depending on what the care label of the item to be
ironed states, to the medium (••) to maximum temperature. Steam-ironing is possible
in this range.
5. As the device heats up, the temperature control lamp (15) lights up. Wait until the
device has heated up and the temperature control lamp goes out.
6. Use the steam quantity control (11) to set the desired quantity of steam (13). You
can now start ironing.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 02759 - SG 5008S-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 02759 - SG 5008S-5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info