703417

Cleanmaxx YS-8001-1 - Z03575 Manual

16
Zoom out
Zoom in
Previous page
1/36
Next page
EN 16
– possible button strips or zip fasteners are closed so that the warm air can circulate
better inside,
– the sleeves are not twisted or scrunched up.
Items of clothing which cannot be pulled onto the hanger (e.g. socks, under-
wear etc.) are secured using the clips (5). To do this, simply hook the hook of
the clip on the bottom of the hanger attachment.
4. Use the hook to hang the hanger up in a suitable place, noting the safety instructions
and the notices at the start of this chapter.
5. Insert the mains plug into an easily accessible socket. The control lamp (9) starts to
fl ash blue.
6. Press the On / Off switch (8) once to switch on hot air. The control lamp lights up red.
7. If cold air is to be switched on, press the On / Off switch again. The control lamp
lights up blue.
8. Once the item of clothing is dry, press the On / Off switch until the control lamp fl ashes
blue again. The air circulation is ended and the device is in standby mode.
The device automatically switches to cold-air mode after 3 hours and to stand-
by mode after another 3 hours.
9. Pull the mains plug out of the plug socket and allow the device to cool down.
Drying shoes
1. Attach the shoe hanger attachments (6) to the main unit (3) (see the “Attaching /
Removing Attachments” chapter).
2. Place the plastic cover on the ventilation outlet (7) on the bottom of the main unit. This
will ensure that all the hot or cold air fl ows directly into the shoe hanger attachments.
3. Release the hook for hanging up (1) on the back of the main unit and push it upwards.
4. Pull the shoe hanger attachments out to the length you want.
5. Place the shoes which are to be dried over the shoe hanger attachments. When you
do this, make sure that there is nothing inside the shoes (socks, paper, laces etc.).
6. Use the hook to hang the hanger up in a suitable place, noting the safety instructions
and the notices at the start of this chapter.
7. Insert the mains plug into an easily accessible socket. The control lamp (9) starts to
fl ash blue.
8. Press the On / Off switch (8) once to switch on hot air. The control lamp lights up red.
9. If cold air is to be switched on, press the On / Off switch again. The control lamp
lights up blue.
10. Once the shoes are dry, press the On / Off switch until the control lamp fl ashes blue
again. The air circulation is ended and the device is in standby mode.
The device automatically switches to cold-air mode after 3 hours and to stand-
by mode after another 3 hours.
11. Pull the mains plug out of the plug socket and allow the device to cool down.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx YS-8001-1 - Z03575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx YS-8001-1 - Z03575 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info