703389

Cleanmaxx PC-P009E - Z04176 Manual

21
Zoom out
Zoom in
Previous page
1/48
Next page
21 EN
Cleaning dust collector, HEPA fi lter, dust fi lter and fi lter holder
1. Turn the cover on the dust collector (1) counter-clockwise until it loosens and remove
it.
2. Pull the fi lter holder (13) out by the handle. The dust fi lter (10) and HEPA fi lter (11)
will come out with it.
3. Turn the fi lter holder and remove it out from the dust fi lter (Fig. D).
4. Pull the HEPA fi lter out of the dust fi lter.
5. Tap the contents out of all parts and clean with a soft brush if necessary. Rinse out
with clean water if needed.
6. Wipe the dust collector with a damp cloth if needed.
Let all parts air dry fully before assembling. NOTICE: Never assemble wet or
damp components or attach them to the motor unit (E)!
Assembly
1. Set the HEPA fi lter (11) in the dust fi lter (10).
2. Set the dust fi lter in the fi lter holder (13) so that the latches are placed in the notches
provided for them, and turn the fi lter holder until it fi ts tightly (Fig. E).
3. Insert the fi lter holder with dust fi lter into the dust collector (9) so that the latches fi t
in the notches on the dust collector (Fig. G). The fi lter holder must fi t properly in the
dust collector without protruding at the top.
4. Set the lid (1) for the dust collector on the dust collector – the latches must lay in the
fi tting notches – and turn clockwise tightly.
5. Insert the dust collector back into the motor unit (E) (see the “Assembly” chapter –
“Remove / insert dust collector”).
Cleaning motor unit, extension tube and nozzles
• Wipe off the motor unit (E), the extension tube (F) and nozzles as needed with a
damp, soft cloth. Dry with a soft cloth.
• Regularly remove hair and lint from the nozzles and brushes.
Storage
• Store the device in a cool, dry, safe area out of direct sunlight and keep out of reach
of children and animals.
• Hang up the motor unit (E) in the wall bracket (I) provided with the suction open-
ing (12) facing down (Fig. F).
• The brush nozzle (D), crevice nozzle (B) and nozzle adapter (A) can be plugged into
the wall bracket (Fig. H) or into the holder for the brush and crevice nozzle (G) on
the extension tube (F) (Fig. F).
If the device is not going to be used for a long time, take out the battery as a
precaution (see the “Assembly” chapter – “Remove / insert battery”). To prevent
the battery from draining completely, charge it occasionally during long periods
of non-use.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx PC-P009E - Z04176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx PC-P009E - Z04176 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info