703389

Cleanmaxx PC-P009E - Z04176 Manual

19
Zoom out
Zoom in
Previous page
1/48
Next page
19 EN
Accessories
• The wall bracket (I) is intended to save space when storing the device (Fig. F). The
crevice (B) and brush (C) nozzles, as well as the nozzle adapter (A), can be clipped
into the semi-circular notches on the wall bracket (Fig. H).
• The brush nozzle (D) is for vacuuming cushions and textiles, and for dusting fragile
objects such as picture frames, lampshades, keyboards, books, etc.
• The crevice nozzle (B) is for hard-to-reach places like corners, crevices and re-
cesses.
• The electric fl oor nozzle (H) is suitable for both carpets and hard fl oors. It has a
rotating cleaning brush to make it easier to pick up hair and fl uff .
• The nozzle adapter (A) is needed to attach the crevice (B) and brush (D) nozzle.
• The extension tube (F) makes it easier to reach the tops of cupboards, ceilings
and corners and, along with the electric fl oor nozzle (H), allows fl oors to be cleaned.
• The holder for the brush and crevice nozzle (G) is suitable for securing the two
nozzles to the extension tube (F) easily to save space.
Assembly
Attach / remove extension tube and electric fl oor nozzle
• Attaching: The extension tube (F) is plugged onto the suction opening (12). It must
engage audibly. Attach the electric fl oor nozzle (H) to the extension tube in the same
way.
• Removing: Press the corresponding release button (Fig. A) and pull the electric
fl oor nozzle (H) or the motor unit (E) out at the same time.
Attach / remove crevice and brush nozzle
The crevice (B) and brush (D) nozzles can be attached to either the suction opening (12)
or the extension tube (F). This requires the nozzle adapter (A).
• Attaching: First plug the the nozzle adapter into the suction opening or the exten-
sion tube. Then plug the desired nozzle into the nozzle adapter.
• Removing: Unplug the used nozzle from the nozzle adapter and pull the nozzle
adapter out of the suction opening or the extension tube.
Remove / insert dust collector
• Removing: Press the unlock button (2) at the top of the dust collector (9) and pull
the dust container upwards to remove it from the motor unit (E).
• Inserting: Insert the dust collector (9) diagonally into the motor unit (E). Make sure
that it sits correctly in the latch on the motor unit (Fig. B). The dust collector should
click audibly as it closes.
Remove / insert battery
• Removing: Press the unlock button on the battery and simultaneously pull it out
(Fig. C).
• Inserting: Before inserting the battery, check whether the contacts are clean, and
clean them if needed. Insert the battery into the compartment on the underside of
the motor unit (E). It should click audibly.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx PC-P009E - Z04176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx PC-P009E - Z04176 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info