703419
20
Zoom out
Zoom in
Previous page
1/44
Next page
EN 20
Cleaning the motor lter
1. Remove the dust bin (see section “Emptying the dust bin”).
The motor lter (1) is located behind the dust bin in the
vacuum cleaner housing. It is protected by a foam lter.
2. Remove the foam lter.
3. Turn the frame with the lter counterclockwise and remo-
ve it. Reach into the two recesses on the frame in order to
rotate and remove the frame.
4. Shake out the lter over an open garbage can.
5. If needed, clean the lter with clear, lukewarm water and
allow it to dry completely. Do not insert the lter if it is still
moist.
6. Place the frame with the lter back in the vacuum cleaner
housing and turn it clockwise to secure it. Reach into the
two recesses on the frame as when removing it.
7. The motor lter is in place when the frame is ush with
the vacuum cleaner housing and the recesses on the
frame are perpendicular to the bracket (D) on the vacuum
cleaner housing and are vertically in line with one another
(see gure).
8. Make sure when inserting the dust bin that it engages
correctly in the vacuum cleaner housing. Therefore,
drepress and hold the release button when inserting
the dust bin and release the button when the button
pin is located unter the bracket on the vacuum cleaner
housing. Do not force the button pin into the bracket.
9. When inserted, the air intake pipe of the dust container must sit correctly on the
opening on the dust container housing (see picture) so that no air can escape at the
sides. After inserting the dust container, you should therefore switch on the device
and block the entrance to the suction tube on the handle with an object (e.g. a cush-
ion etc.) so that a vacuum can be produced and the air intake pipe can “ rmly suck”
onto the opening on the vacuum cleaner housing.
Cleaning the exhaust lter
1. Open the exhaust ap on the back of the vacuum cleaner. The exhaust lter is
located behind the exhaust ap.
1
D
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx PC-C001-6 - MZS900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx PC-C001-6 - MZS900 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info