703396
22
Zoom out
Zoom in
Previous page
1/52
Next page
EN 22
Use
PLEASE NOTE!
Ensure that there are no larger, sharp objects on the surface which is to be cleaned.
Do not use the device when it is connected to the mains adapter.
Empty and if necessary clean the dust container after each use (see the "Cleaning
the Device and Accessories" chapter).
Switch the device off after each surface has been cleaned as this will considerably
increase the operating time on each battery charge. Charge up the battery after use
(see the "Charging Up the Battery" chapter).
If the suction performance diminishes, empty the dust container (12) and / or
charge up the battery.
When the device is switched on or connected to the charging station (23), the
battery status is displayed. If all three battery control lamps (9) are lit up, the
battery is full. The fewer lamps are on, the lower the battery charge.
Floor Vacuum Cleaner
To operate the device as a oor vacuum cleaner, the cordless vacuum cleaner and the
turbo nozzle (7) must be inserted in the frame (6) (see the “Assembly” chapter).
1. Take the frame (6) with the cordless vacuum cleaner from the charging station (23).
2. Hold the turbo nozzle (7) with your foot and tilt the frame (6) downwards. This will
release the upright position.
3. The stem of the frame (6) contains the operating buttons (16):
Switch on/off
+ Increase suction power by one level
Reduce suction power by one level
Switch the brush rotation in the turbo nozzle on/off
Switch on the cordless vacuum cleaner and guide the turbo nozzle (7) over the oor.
Switch on the brush for more in-depth cleaning. When the brush is switched on, the
control lamps (10) on the turbo nozzle (7) light up.
4. Fold down the stem (15) to vacuum under furniture. To do this, pull the lever (8) be-
neath the handle (17) upwards. This loosens the joint (1) of the frame (6) and makes
it exible.
To allow easy handling,
the joint of the turbo noz-
zle (7) can be moved to the
left / right as well as up and
down.
5. To park the cordless vacuum cleaner from time to time, put the frame (6) into the up-
right position. The joint (1) locks in place when the frame (6) and the turbo nozzle (7)
form a 90° angle (upright position). To release the upright position, hold the turbo
nozzle (7) with your foot and tilt the frame (6) downwards.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx EV-660-S148 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx EV-660-S148 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info