703396

Cleanmaxx EV-660-S148 Manual

23
Zoom out
Zoom in
Previous page
1/52
Next page
23 EN
Handheld Vacuum Cleaner
1. Remove the cordless vacuum cleaner from the frame (6). To do this, press the release
button (2) on the side of the handle (3) and pull out the cordless vacuum cleaner.
2. Plug the crevice or brush nozzle (19) into the suction opening (11). The cordless
vacuum cleaner can also be used without a nozzle.
3. To switch it on and off, press the switch (14) next to the handle (17).
Cleaning the Device and Accessories
PLEASE NOTE!
■ Make sure that the device is switched off before cleaning it!
■ Only reassemble the device once all of the parts are completely dry!
■ The fi lter is neither machine-washable, dishwasher-safe nor suitable for tumble drying.
Never clean the fi lter with soap or other cleaning agents to prevent damage to the fi lter.
■ Only ever dry the fi lter in the air, and never use a hair dryer to do so.
■ Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice and accessories. These could damage the surfaces.
• To ensure optimum performance of the device, you should empty the dust contain-
er (12) (see "Emptying the Dust Container and Cleaning the Filter" below) after every
use.
• If necessary, wipe down the device and accessories with a soft, damp cloth and then
wipe them dry.
• Remove hair and fl uff from the nozzles.
• Check the mains adapter (21) and the mains cable for damage at regular intervals.
• Keep the device ready for operation and charge up the battery after each use (see
the "Charging Up the Battery" chapter).
Emptying the Dust Container and Cleaning the Filter
1. Detach the motor unit (5) from the dust container (12): Hold the device with the dust
container (12) at the bottom. Grip the dust container (12), press the release but-
ton (13) and remove the motor unit (5) (see the “Assembly” chapter, “Inserting / Re-
moving the Dust Container” section).
2. Hold the dust container (12) over a dustbin.
3. Pull the fi lter mount out of the dust container (12) (see
picture).
4. Empty the dust container (12).
5. The fi lter mount contains a small basket that protects the
HEPA fi lter. Twist the small basket a little bit and remove it.
6. Tap out both parts and clean them with a soft brush if necessary.
7. The fi lter and the plastic parts can also be rinsed with clear, lukewarm water.
CAUTION: Do not use any cleaning agents!
8. Let all parts dry completely in the air before you reassemble them. CAUTION: Never
assemble wet or damp components or attach them to the motor unit (5)! The
device is assembled in the reverse order.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx EV-660-S148 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx EV-660-S148 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info