735430
46
Zoom out
Zoom in
Previous page
1/86
Next page
46
7. a) Pulse el botón para cambiar la temperatura con los botones o .
La temperatura puede configurarse entre 15°C y 35°C; cada pulsación añadirá 1 °C.
b) Pulsando de nuevo el botón , o si no se pulsa ningún botón durante 5 segundos, se alcanzará
inmediatamente la temperatura programada.
c) Si no se pulsa ningún botón durante 5 segundos (a excepción de o ), el indicador LED
mostrará la temperatura ambiente. Cuando la temperatura es igual o inferior a -10 °C, la pantalla
muestra "LO"; cuando la temperatura es superior a 40 °C, la pantalla muestra "HI".
d) Después de encender el aparato, comenzará a medir la temperatura pasados 10 segundos.
Si la temperatura ambiente es superior a la temperatura programada, la función
de calentamiento del PTC se desactivará, la luz de baja/alta potencia calorífica se apagará y,
pasados 10 segundos, también se apagará el ventilador. Asimismo, si ha activado la función
de oscilación, también se detendrá. Los demás iconos no cambiarán. Si la temperatura ambiente
es inferior en 1 °C a la temperatura programada, la función de calefacción se volverá a activar,
así como el ventilador y la función de oscilación (en el caso de que se hubieran activado).
Los demás iconos seguirán encendidos.
e) Si se programa el temporizador y la temperatura ambiente, los valores se muestran
en la pantalla, pasando de uno a otro cada 30 segundos).
8. Última programación de la memoria: al encender el aparato, se activarán los últimos
ajustes programados
9. Después de 1 minuto de funcionamiento del aparato, la luz de la pantalla de los botones
se oscurecerá.
10. Función de protección contra recalentamiento NTC:
A temperaturas superiores a 55 °C, el aparato se apagará solo. Si la temperatura ambiente
desciende por debajo de los 45 °C, el aparato puede volver a encenderse manualmente.
Si la temperatura vuelve a superar los 45 °C, el aparato se apagará de nuevo. Después
de 12 horas de funcionamiento sin cambios en los ajustes, el aparato se apagará solo.
Limpieza y mantenimiento
Desenchufe el calentador antes de cada operación de mantenimiento y espere a que se enfríe.
Si es necesario, puede utilizar un paño suave con un producto de limpieza neutro disuelto en agua
tibia (por debajo de 50 °C) para limpiar el lado exterior del ventilador. Seque con cuidado.
Para evitar daños en el aparato, no utilice productos de limpieza agresivos para limpiar la superficie
del calentador.
Guarde el calentador en un lugar seco y ventilado.
46


Need help? Post your question in this forum.

Forumrules
1

Forum

clean-air-optima-ca-904w

Reset search

  • Nederlandse vertaling van de gebruiksaanwijzing Clean Air Optima CA-904W Submitted on 24-1-2021 at 10:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clean Air Optima CA-904W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clean Air Optima CA-904W in the language / languages: All languages as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info