159842

Clatronic mc 1027 cd mp3 Manual

30
Zoom out
Zoom in
Previous page
1/44
Next page
ENGLISH
30
• If the remote control is not used for a prolonged pe-
riod, remove the batteries in order to prevent battery
acid leaking.
• Different battery types or new and used batteries
must not be used together.
Warning: batteries are not to be disposed of together
with domestic wastes. Dispose of the used batteries at
the relevant collection bin or at your dealer’s.
Never throw batteries into the fi re.
CD deck transport protection
• Please open the CD compartment (11) by pressing
the PUSH/OPEN button (12).
• Remove the transport protection from the CD player if
present before use.
Headphone Socket (19)
Please use headphones with a 3.5 mm stereo jack
plug; these should be inserted into the
socket. The
loudspeakers are then switched off.
General Operation
POWER (1) (1 on the remote control)
Please turn the device on with the POWER switch. The
STANDBY control lamp goes off.
Switch off
Switch the music centre to standby using the POWER
button (the STANDBY control lamp lights up in red).
BASS BOOST (4)
This is used to amplify the bass sounds. The switch can
be in one of two positions,
ON or OFF.
Volume
You can set the desired volume using the ̆ / ̄ VOLUME
control (5) (2 on the remote control).
Infrared remote control
For operating the music centre from a distance of up to 5
metres without a lead. If the range of the remote control
is reduced, the batteries have to be replaced. During
operation ensure that there is nothing blocking the direct
line between the remote control and the sensor (3) on the
machine.
AUX IN socket (20)
To connect analogue replay devices. Use this jack to
replay sound of other replay equipment such as DVD
players, computers, etc. via the loudspeakers.
1. Please connect the external device with a 3.5 mm
stereo jack plug to the AUX IN socket.
2. Turn the FUNCTION function selector switch (6) to
the AUX position.
3. Through the loudspeakers you will now hear the
sound from the external device. You can adjust the
volume with the VOLUME control (5) (2 on the remote
control). The CD buttons have no function in this
mode.
4. For the remaining procedure please see the operating
instructions of the external sound source.
USB Connection (7)
This device has been developed in accordance with the
latest technical developments in the USB fi eld. Unfortu-
nately the large number of different types of USB storage
media on offer today makes it impossible to guarantee full
compatibility with all USB storage media.
1. In order to switch on the device please press the
POWER switch (1/1).
2. Turn the FUNCTION function selector switch (6) to
the CD position.
3. Connect a USB storage medium.
4. Hold the ̈ II PLAY/PAUSE button (14/3) down for
approx. 3 seconds until the letters USB light up in the
display. The device is now in USB mode. After a few
seconds the total number of songs/tracks is shown in
the display (13).
5. Press ̈ II PLAY/PAUSE (14/3) to play back the music
data.
6. For operating instructions please see the section
“Playing CDs/MP3s”.
7. If the USB connection is no longer required, hold the
̈ II PLAY/PAUSE button (14/3) down for approx.
3 seconds until the letters USB go off in the display.
The device is now in CD mode.
Important: Before you remove the USB storage medium,
turn the device off with the POWER switch (1/1) or turn
the function selector switch (6) to RADIO.
Note: If you have problems with operation using the USB
connection, please use an appropriate adapter cable and
proceed as described under AUX IN.
Listening to the Radio
Press the POWER button (1/1) in order to be able to use
the functions with the device switched on. The STANDBY
light goes off.
1. Turn the FUNCTION function selector switch (6) to
the RADIO position.
2. With the BAND band selector switch (9) you can
select the desired frequency band.
Medium Wave = MW/AM (Mono), VHF = FM,
VHF (Stereo) = FM ST
3. Tune in the desired station with the station adjustment
knob TUNING (8).
4. The ST control lamp
(in the display) only lights
up when you have selected FM stereo and the station
is being received in stereo quality. If reception is too
weak and there is noise on the station being received,
this lamp will fl icker. Try to improve reception by tur-
ning and bending or twisting and altering the length of
the antenna (23). In the case of FM stations you can
use the BAND selector switch (9) to switch between
FM (MONO) and FM ST. (STEREO) reception. Where
reception is bad we recommend switching to MONO.
5. An aerial is integrated into the device for the reception
of AM stations. The machine can be aligned to the
station by turning it. In this frequency band programs
are transmitted in „mono“ only.
05-MC 1027 CD/MP3 30 11.01.2006, 9:36:52 Uhr
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic mc 1027 cd mp3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic mc 1027 cd mp3 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info