380486
26
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
ENGLISH
26
6. Position the cover of the mixer drive (19) on the base of the
machine so that the
arrow is pointing to the circular
mark on the base. Then turn the mixer (3) or the mixer drive
cover (19) clockwise until the
arrow is pointing to the
mark on the base of the machine.
Double Safety System: The motor can only be switched on
if the bowl is correctly locked in place with the lid and at the
same time the mixing vessel or the cover for the mixer drive (19)
is correctly mounted. Only remove the lid of the bowl and the
mixing vessel when the machine is switched off.
Mixer function
The bowl must be fi xed in place as described under section
1 and 5 (without utensil).
Chop the food to be mixed into small pieces.
Fill the mixer vessel (3) with the food to be mixed (max.
1.5 l). Never fi ll with hot food or hard ingredients such as
potatoes, ice, coffee beans, nuts, and so on.
Position the lid (4) with the pouring aperture facing to the
right and then lock this in place by turning it anticlockwise.
Close the fi lling slot seal (5).
Mount the mixing bowl (3) as described in paragraph 6.
Extra ingredients (e.g. seasoning) can also be added
through fi lling slot in the mixer lid. Switch off the appliance.
Mixing bowl
The lid of the mixing device (19) must be mounted as
described in paragraph 6.
The mixing bowl must be mounted as described in para-
graph 1.
Press the metal knife (15) or the plastic knife (16) down-
wards as far as possible without the utensil holder.
When grating/cutting attachments are used, place the
desired utensil on to the utensil holder (14).
Never use more than one utensil at a time.
Position the lid of the bowl (8) as described under points 4
and 5.
Use the fi ller (17) to press the food (max. 1.5 l) into the
lling slot. Exert a suffi cient degree of pressure on the fi ller.
The appliance must be switched on only with the fi ller (17)
mounted into place.
Putting into function
Connect the appliance to a 230 V/50Hz socket.
Interval switching (P): turn the appliance switch to the left
at brief and regular intervals several times. By doing so, the
result of the operation can be checked gradually.
Always choose a utensil and a speed according to the following
table:
Product/
Type of Preparation
Max.
Quantity
Utensil Level
Max.
Operating
Time
Heavy dough
(e.g. yeast dough)
500 g plastic knife I to II 3 min
Cake mixture 750 g plastic knife II to III 5 min
Sponge mixture or
wafer mixture
750 g plastic knife II to III 5 min
Cutting up, e.g. fruit,
vegetables, meat
500 g metal knife II to III 5 min
Cutting cucumbers,
carrots
500 g
cutting
attachment 12
II to III 5 min
Grating carrots, radish,
cheese
500 g ne grater II to III 5 min
Grating apples and
carrots
500 g coarse grater II to III 5 min
Grating potatoes,
hard cheese
500 g grating attachment II to III 5 min
Potatoes 500 g chip disk II to III 3 min
Liquids, shakes up to 1.5 l mixing vessel III or P 2 min
Note: The cutting and grinding attachments are located in the
accessory drawer (20) under the machine.
Cleaning
Remove the plug from the socket before cleaning!
Clean the bowl and the mixing vessel carefully immediately
after each procedure. To do so, remove the bowl in order to
be able to clean off any residues on the drive shaft.
Never use sharp objects for cleaning!
Never use abrasive detergents!
Use a moist towel to clean the outside of the basis appliance.
In the case of intensely colored foodstuffs (e.g. carrots), the
plastic parts can be stained: clean them with oil.
Any removable parts which have come into contact with
food (utensil and bowls) can be cleaned in soapy water.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 84.1 dB(A) (no limit)
Technical Data
Model: ..............................................................................KM 2717
Power supply:............................................................230 V, 50 Hz
Power consumption :...........................................................700 W
Protection class:.......................................................................... ΙΙ
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
05-KM 2717 N4 26 02.05.2006, 11:58:04 Uhr
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic km 2717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic km 2717 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info