362104

Clatronic kav 3002 Manual

52
Zoom out
Zoom in
Previous page
1/178
Next page
52
Cleaning and maintenance
Resetting the default
factory settings
Reset the default factory settings using the menu command
"Default".
Any changes you have made will be lost.
Setting the grinding level
The grinding level setting determines how fine or coarse the coffee
is to be ground. The grinding level is set at the factory in such a way
that optimal results are achieved for most types of coffee.
However, the grinding level should be adjusted in the following
cases:
Coffee output is too slow: Too many bitter constituents are
released. The coffee tastes bitter. Choose a coarser grinding
level.
No/little froth: Coffee output is too fast. Because of the quick
throughput time, the coffee does not release all its aromas. The
coffee is tasteless.
Choose a finer grinding level.
Change the grinding level as follows:
1. Remove the cover on the coffee bean container (Fig. 1/20).
2. Press the rotary knob down. Change the grinding level by
carefully turning the rotary knob (Fig. 16/1).
- Turn the rotary knob to the right (in the direction of Position 1)
to achieve a finer grinding level.
- Turn the rotary knob to the left (in the direction of Position 8)
to achieve a coarser grinding level.
- If the rotary knob cannot be turned easily: briefly turn on the
coffee production and adjust the rotary knob at the same time.
The rotary knob should now turn easily.
Cleaning and maintenance
Always keep the machine clean to achieve a consistently good
coffee quality and fault-free functioning.
Cleaning the outside of the
housing
Only ever clean the housing with a slightly damp cloth. Do not use
any cleaning agents, abrasives or alcohol as these can damage the
housing.
WARNING:
Danger of injury: Never reach into the grinding gear!
1
/E
S
C
7
PRESS
2
1
3
4
5
6
8
Fig. 16
WARNING:
Danger of injury: Before cleaning the machine, turn the machine
off and remove the mains plug. Wait until the machine and
accessories have cooled down.
WARNING:
Danger of electric shock:
Never dismantle the machine! Do not carry out any work on the
insides of the machine!
Do not allow any moisture to enter the housing!
Never put the machine in a dishwasher!
Never submerse the machine in water or other liquids!
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic kav 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic kav 3002 in the language / languages: English, German, Dutch, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info