693412

Clatronic ICM 3594 Manual

40
Zoom out
Zoom in
Previous page
1/70
Next page
40
5. Turn the appliance on using the on/off switch (ON position).
6. Fill the chilled ice cream mixture through the ller hole into
the bowl.
7. Draw a sample after approx. 10 – 15 minutes. In order to
do so, press down the lever of the outlet unit.
8. Once the ice cream has reached the consistency for soft
ice cream, draw the cones without any delay. Leave the
appliance turned on while doing so.
9. When the ice cream becomes too viscous to be drawn
through the outlet unit, turn off the appliance (OFF
position). Disconnect the plug from the wall socket.
10. Unlock the lid turning it anti-clockwise. Remove the lid.
Depending on the consistency of the ice cream, the stirring
attachment will come out together with the lid. If the stirring
attachment remains stuck inside the ice cream, pull it out.
11. Remove the remaining ice cream from the bowl using a
silicone or wooden spoon.
After use
• Store ready-made ice cream that you want to eat later in
the freezer.
• Do not freeze ice cream once thawed.
• Clean the appliance after each use as described under
“Cleaning”.
Recipes
• When making the ice cream mixture, please refer to chap-
ter “Preparations point 4”.
• Quantities provided in the recipes are for reference only.
Adjust individual mixtures as desired.
• Using whipping cream instead of double cream will affect
the ratio of ingredients. In such a case, use more whipping
cream and less milk.
• Refer to other recipe books or the internet for more recipes.
Vanilla ice cream
Vanilla extracts 10 g
Milk 250 ml
Double cream (min. 40% fat content) 150 ml
Sugar 50 g
Strawberry ice cream
Strawberries (fresh and pureed) 200 g
Milk 200 ml
Double cream (min. 40% fat content) 150 ml
Sugar 50 g
Banana ice cream
Bananas (ripe and mashed) 150 g
Milk 300 ml
Double cream (min. 40% fat content) 150 ml
Sugar 50 g
Lemon ice cream
Lemon juice 50 ml
Milk 200 ml
Double cream (min. 40% fat content) 150 ml
Sugar 80 g
Cleaning
WARNING:
• Before cleaning always disconnect from mains power supply.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or re.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• None of the parts are dishwasher-safe.
Stirring attachment
Remove the stirring attachment from the motor housing. Refer
to the pictures on page 5 for disassembling its component
parts.
1. Move the ring on the upper shaft upwards.
2. a) Carefully press the lower shaft out of the clasp.
b) Pull out the lower shaft.
3. Loosen the wing screw by holding the stirring attachment
and turning the screw anti-clockwise.
4. Pull out the wing screw.
5. When clean and dry, assemble the stirring attachment in
reverse order.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic ICM 3594 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ICM 3594 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info