693412
38
Zoom out
Zoom in
Previous page
1/70
Next page
38
Overview of the Components
1 On/off switch
2 Motor housing
3 Lid with ller hole
4 Stirring attachment
5 Bowl
6 Mounting ring
7 Housing
8 Outlet unit
9 Foot
Page 5
A Lower shaft
B Blades
C Wing screw
D Stirring attachment (frame)
Unpacking the appliance
1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic lms, ller
material, cable ties and cardboard packaging.
3. Check the content for any missing parts.
NOTE:
There may be dust and production residue on the appliance.
We recommend cleaning the appliance as described under
“Cleaning”.
Assembly of the appliance
Familiarize yourself with the assembly of the appliance before
making ice cream for the rst time. Please refer to the pictures
on pages 3 and 4.
1. Fig. A: Place the motor housing into the recess of the lid
and let it lock into place.
2. Fig. B: Attach the assembled stirring attachment to the
bottom of the motor housing. Before doing so, check the
correct assembly of the stirring attachment (see “Cleaning
Stirring attachment”).
3. Fig. C: Place the housing onto the foot, if you have discon-
nected these components previously.
WARNING:
Cleaning and user maintenance shall not be made by children,
unless they are older than 8 years and supervised.
Keep the appliance and its cord out of reach of children less than
8 years.
Children shall not play with the appliance.
Appliances can be used by persons with reduced physical, sen-
sory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards
involved.
This device is not intended to be immersed in water during clean-
ing. Please observe the instructions that we have included in the
chapter “Cleaning”.
Do not touch any moving parts of the machine and always wait for it
to stop.
Do not remove the lid during operation.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic ICM 3594 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ICM 3594 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info