382175
64
Zoom out
Zoom in
Previous page
1/102
Next page
GB
64
2. Rinse off the loosened dirt with the high-pressure jet.
Water Loss
It is normal for the pump to lose small quantities of water. If there is a sizeable
leak, please contact our service department.
Protection against Damage
Please do not underestimate the pressure produced by the high-pressure
cleaner. If you would like to clean sensitive surfaces it is better to use the fan
jet (See „Adjustment of the Spray Jet“ in the section „Operation“). In the case of
paints or insulated facades please begin at a considerable distance away. Move
slowly closer - depending on the degree of soiling - to the object to be cleaned.
Check the progress of your work at short intervals in order to prevent damage.
Never point the high-pressure jet at other people, animals, the device itself
or electrical equipment!
Operation
Connection
1. Use a hose to connect the water connection (3) to the water supply.
2. Open the water supply and check for any leaks. A low level of water loss by the
pump is normal.
3. Secure the manual spray gun (8) with the lock (10).
4. Insert the mains plug (9).
5. Turn the main switch (1) on.
Working with the Hand Spray Gun (8)
Switching on:
Release the lock (10) and pull the lever of the gun.
Caution! Recoil
Switching off:
Release the lever. During work breaks secure the hand spray
gun (8) with the lock (10).
Adjustment of the Spray Jet
By turning the nozzle (5) you can vary the spray from a narrow jet to a fan jet. See
also ABB. 1.
Note: If you use the detergent vessel, the spray jet should only be adjusted when
the device is not in operation. Otherwise there is a danger that the detergent ves-
sel will become loose when the spray jet is adjusted (danger of injury). Please also
ensure that the detergent vessel is always facing downwards and is fi rmly in place
on the high-pressure nozzle (11) before putting the device into operation.
6....-05-HDR 2941 64 07.01.2005, 14:32:17 Uhr
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic hdr 2941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic hdr 2941 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info